How to service the shock absorber on 2002 Ford Windstar?

Start the shock absorber servicing process by putting the vehicle onto a hoist then taking off the tire-wheel components. Before taking out the shock absorber or its retaining bolts it is vital to support the rear axle assembly with a jack stand to stop possible component damage. The rear axle U-channel needs to fit completely into the saddle of the jack stand. The shock absorber maintenance procedure starts with lower bolt and nut removal before moving on to the upper bolt removal and finally removing the shock absorber. During assembly reinstall the parts in reverse order while replacing all fasteners with components that have identical part numbers or equivalent substitutes because inferior parts may cause serious service complications. Safeguard the essential components through proper retention by following the established reassembly torque values.

OEM 2002 Ford Windstar Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Shock Absorbers found

View related parts
2002 Ford Windstar Shock Absorber, Rear
Part Number: 2F2Z-18125-B
$40.24 MSRP: $54.76
You Save: $14.52 (27%)
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assembly; Suspension Shock Absorber, Rear; Shock
- Position: Rear
- Replaces: 6F2Z-18125-A, ASH-24577, 2F2Z-18125-A, 3F2Z-18125-AA, 2F2Z-18125-AB, ASH-239, ASH-1121, ASH-52, 6F2Z-18125-AB
- Base No.: 18125
- Item Weight: 4.80 Pounds
- Item Dimensions: 20.9 x 3.5 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2F2Z-18125-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Windstar Submodels:
- 3.0L, Base, GL, Limited, LX, SE, SE Sport, SEL | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
2002 Ford Windstar Shock Absorber
Part Number: 2U2Z-18125-GA
Product Specifications
- Other Name: Shock Absorber Assembly; Shock
- Manufacturer Note: w/air suspension
- Base No.: 18125
- Item Weight: 4.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 2U2Z-18125-GA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Windstar Submodels:
- 3.0L, Base, GL, Limited, LX, SE, SE Sport, SEL | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS
View related parts
2002 Ford Windstar Strut, Front
Part Number: 2F2Z-18124-AA
Product Specifications
- Other Name: Shock Absorber Assembly - Front; Complete Suspension Strut and Shock Kit.; Shock Absorber
- Position: Front
- Replaces: XF5Z-18124-AB
- Base No.: 18124
- Item Weight: 11.50 Pounds
- Item Dimensions: 28.8 x 6.7 x 6.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 2F2Z-18124-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2002 Ford Windstar Submodels:
- 3.0L, Base, Limited, LX, SE, SE Sport, SEL | 6 Cyl 3.0 L GAS, 6 Cyl 3.8 L GAS

2002 Ford Windstar Shock Absorber

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2002 Ford Windstar Shock Absorber available at FordPartsDeal.com. You can confidently purchase our OEM 2002 Ford Windstar Shock Absorber as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2002 Ford Windstar Shock Absorber Parts Questions & Experts Answers

Q: How to service the shock absorber on 2002 Ford Windstar?
A: Start the shock absorber servicing process by putting the vehicle onto a hoist then taking off the tire-wheel components. Before taking out the shock absorber or its retaining bolts it is vital to support the rear axle assembly with a jack stand to stop possible component damage. The rear axle U-channel needs to fit completely into the saddle of the jack stand. The shock absorber maintenance procedure starts with lower bolt and nut removal before moving on to the upper bolt removal and finally removing the shock absorber. During assembly reinstall the parts in reverse order while replacing all fasteners with components that have identical part numbers or equivalent substitutes because inferior parts may cause serious service complications. Safeguard the essential components through proper retention by following the established reassembly torque values.