OEM 2002 Ford Windstar Cruise Control Servo

2002 Ford Windstar Cruise Control Servo Parts Questions & Experts Answers

• Q: How to service and repair the cruise control servo on 2002 Ford Windstar?

  A: The first step to fix the cruise control servo begins with battery ground cable disconnection. You should detach the speed control actuator cable end from the throttle nailhead by applying forward pressure. The engine air cleaner should be removed first before removing the electrical connector from the speed control servo. The speed control servo bracket screws must be unscrewed before you can remove the speed control actuator cable cap through counterclockwise rotation of its locking tab while depressing it. Proceed with removing the speed control cable slug followed by the actuator cable from the speed control servo pulley using properly opened throttle control to relieve cable tension. The speed control installation requires insertion of the speed control cable slug into the servo pulley slot followed by lining up the cap tabs with their corresponding positions in the servo housing while making sure the rubber seal finds its full seat before tightening the clockwise cap until the locking tab enables. Sliders for the speed control servo bracket follow while you reconnect the speed control servo electrical connector as well as reinstall the engine air cleaner assembly. Before ending the repair process it is necessary to rejoin the throttle nailhead end of the speed control actuator cable followed by reattaching the battery ground cable.