FordParts
My Garage
My Account
Cart
OEM 2002 Lincoln Blackwood Blower Motor
A/C Heater Blower Motor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Blower Motors found
2002 Lincoln Blackwood Blower Motor, Front Part Number: XL7Z-19805-EA
$94.78 MSRP: $159.13You Save: $64.35 (41%)Product Specifications- Other Name: Motor - Cooling Blower; HVAC Blower Motor, Front; Blower Assembly; HVAC Blower Motor
- Manufacturer Note: Main unit: kit includes motor, retainer, & seal
- Position: Front
- Replaces: F85Z-19805-CA
- Base No.: 19805
- Item Weight: 4.30 Pounds
- Item Dimensions: 5.9 x 7.4 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XL7Z-19805-EA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2002 Lincoln Blackwood Housing Assembly Part Number: YL3Z-18456-CA
Product Specifications- Other Name: Blower Assembly; HVAC Unit Case; A/C System Seal Kit; Case Assembly; Seal
- Manufacturer Note: Heater housing blower asy, Less A/C
- Base No.: 18456
- Item Weight: 15.30 Pounds
- Item Dimensions: 18.0 x 20.4 x 41.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YL3Z-18456-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2002 Lincoln Blackwood Blower Motor
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2002 Lincoln Blackwood Blower Motor available at FordPartsDeal.com. You can confidently purchase our OEM 2002 Lincoln Blackwood Blower Motor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2002 Lincoln Blackwood Blower Motor Parts Q&A
- Q: How to service the blower motor located in the center console on 2002 Lincoln Blackwood?A: Service of the center console blower motor begins by taking the ducts out from the center console. Start by unfastening three nuts holding the assembly before loosening the motor connection to decrease the console base. Start by disconnecting the blower motor harness connectors before removing the blower motor resistor by detaching its connector and unbolting the resistor. To access the lower duct cover of the blower motor start by removing its five screws until you can detach the duct cover. You should first unscrew the three bolts which secure the upper duct cover to detach it from the setup. Perform the final step by detaching the blower motor using two bolt removal followed by connector disconnection and motor extraction. Reinstall the equipment through steps that are opposite to the disassembly steps.