Other Name: Bulb; Center High Mount Stop Light Bulb; Back Up Light Bulb; License Plate Light Bulb; Turn Signal Light Bulb; Signal Lamp Bulb; various types for exterior and interior lighting.
Position: Rear Outer
Replaces: E9JY-13466-A, F4ZZ-13466-A
Base No.: 13466
Item Weight: 0.30 Pounds
Item Dimensions: 0.4 x 0.4 x 1.0 inches
Condition: New
Fitment Type: Direct Replacement
SKU: E5RY-13466-B
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2002 Lincoln LS Submodels:
Appearance, Base, LSE, Luxury, Premium, Sport, Ultimate | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS
Other Name: Bulb, Turn Signal & Parking, Tail, Backup, License Plate, Side Marker, Headlight; Backup Lamp Bulb; Signal, Parking, Stop, High Mount, Cornering, License, and Parking Light Bulbs.
Position: Lower Outer
Replaces: F8DZ-13466-AB, E8AZ-13466-A
Base No.: 13466
Item Weight: 0.40 Pounds
Item Dimensions: 0.4 x 0.4 x 1.0 inches
Condition: New
Fitment Type: Direct Replacement
SKU: F5DZ-13466-B
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2002 Lincoln LS Submodels:
Base, LSE | 6 Cyl 3.0 L GAS, 8 Cyl 3.9 L GAS
2002 Lincoln LS Headlight Bulb
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2002 Lincoln LS Headlight Bulb available at FordPartsDeal.com. You can confidently purchase our OEM 2002 Lincoln LS Headlight Bulb as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2002 Lincoln LS Headlight Bulb Parts Q&A
Q: How to service the headlight bulb on 2002 Lincoln LS?
A: The process for servicing the headlamp bulb involves first removing both the radiator upper sight shield along with the pin-type retainers. The halogen bulb holds pressurized gas that can break if its glass envelope sustains damage through scratching or dropping; thus, handle the bulb only at its base while keeping away from the glass portion. Keep the headlamp bulb inside the assembly until your final stage before installation because contaminants will affect performance if they enter. Proceed with maintenance only after completely switching off the headlamp and ignition lights. First detach the electrical connector while taking the opportunity to remove both the high beam and low beam bulbs in an identical way. The installation follows all opposite directions from the removal process.