FordParts
My Garage
My Account
Cart
OEM 2002 Mercury Sable Control Arm
Suspension Arm- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
5 Control Arms found
Product Specifications- Other Name: Arm Assembly - Rear Suspension; Suspension Control Arm, Rear Left Forward; Front Lower Control Arm; Suspension Control Arm
- Manufacturer Note: LH,Used on front or rear, has bushing to accept 5K751 adjusting cam.
- Position: Rear Driver Side
- Replaces: YF1Z-5500-FL
- Base No.: 5500
- Item Weight: 5.90 Pounds
- Item Dimensions: 33.3 x 6.1 x 7.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1F1Z-5500-FL
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Arm Assembly - Front Suspension; Suspension Control Arm, Front Right; Suspension Control Arm; Control Arm
- Manufacturer Note: R.H., The forward bushing has a 14.2mm inner diameter, the rearward has a 14.2mm inner diameter bushing. The ball joint serviced in 3K185/3K186, FROM 05/13/98 TO 04/08/03
- Position: Front Passenger Side
- Base No.: 3078
- Item Weight: 10.50 Pounds
- Item Dimensions: 15.5 x 2.5 x 21.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F8DZ-3078-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Arm Assembly - Front Suspension; Suspension Control Arm, Front Left; Suspension Control Arm; Control Arm
- Position: Front Driver Side
- Base No.: 3079
- Item Weight: 10.30 Pounds
- Item Dimensions: 15.8 x 2.6 x 21.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F8DZ-3079-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Arm Assembly - Rear Suspension; Suspension Control Arm, Rear Left Upper; Suspension Control Arm; Control Arm
- Manufacturer Note: LH, UPPER
- Position: Rear Upper Driver Side
- Base No.: 5500
- Item Weight: 15.20 Pounds
- Item Dimensions: 19.6 x 7.0 x 13.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F6DZ-5500-DB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
- Product Specifications
- Other Name: Arm Assembly - Rear Suspension; Suspension Control Arm, Rear Right Upper; Suspension Control Arm; Control Arm
- Manufacturer Note: RH, Upper
- Position: Rear Upper Passenger Side
- Base No.: 5500
- Item Weight: 14.90 Pounds
- Item Dimensions: 19.4 x 7.2 x 13.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F6DZ-5500-CB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2002 Mercury Sable Control Arm
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2002 Mercury Sable Control Arm available at FordPartsDeal.com. You can confidently purchase our OEM 2002 Mercury Sable Control Arm as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2002 Mercury Sable Control Arm Parts Questions & Experts Answers
- Q: How to service and repair the lower control arms on a four-door on 2002 Mercury Sable?A: To access the lower control arm system drive the four-door vehicle into a horizontal position and measure the center-hub distance to the fender lip after unfastening the wheel cover or hub cap. Take out the entire wheel unit from its position. For the front lower control arms stop threading the bolt and unlatch the parking brake cable alongside the rear anti-lock brake sensor wiring harness if your vehicle has it. Take out the lower control arm from the spindle by removing the nut and washer then the flag bolt. Toss the nut and flag bolt away after completion. Unscrew the front lower control arm flag bolt and nut while taking out the adjusting cam for disposal. Separate the rear lower control arm by removing its attaching nut and flag bolt then discarding these parts. You must bolt both lower control arms to their proper position based on several conditions. First, set the arms stamped "BOITOM" lower face up towards you. The flange on the rear lower should point toward the front of the vehicle, and the flange on the front lower should point toward the back. Place the rear lower suspension arm into position while adding its two new components but avoid tightening the hardware. Place the front lower control arm and adjusting cam into their positions while adding brand new hardware including a flag bolt and nut. Keep the hardware loose at this moment. Put the adjusting cam in its center position and fit the suspension arm before adding a new bolt, washer and nut. Place the lift under the suspension to lift it until the hub center matches the fender at its factory setting. Install the jack stand to lift the suspension. After that, tighten the nut before lowering the suspension to remove the jack stand. Connect the front lower control arm by reattaching both the parking brake cable and the rear brake anti-lock sensor wiring harness before installing the bolt. After putting the tire and wheel on check all wheel alignment and if needed make position changes.
Related 2002 Mercury Sable Parts
2002 Mercury Sable Axle Beam
2002 Mercury Sable Ball Joint
2002 Mercury Sable Coil Springs
2002 Mercury Sable Control Arm Bushing
2002 Mercury Sable Front Cross-Member
2002 Mercury Sable Spindle
2002 Mercury Sable Steering Knuckle
2002 Mercury Sable Sway Bar Bracket
2002 Mercury Sable Sway Bar Bushing
2002 Mercury Sable Sway Bar Kit
2002 Mercury Sable Sway Bar Link
2002 Mercury Sable Sway Bar Link Bushing