My Garage
Cart

OEM 2002 Mercury Villager Power Steering Pump

Power Steering Pump Unit
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Power Steering Pump found

  • 2002 Mercury Villager Power Steering Pump - XF5Z-3A674-BA
    2002 Mercury Villager Power Steering Pump Diagram - XF5Z-3A674-BA
    View related parts
    Product Specifications
    • Other Name: Pump Assembly - Power Steering
    • Manufacturer Note: Parts List No. 0 Complete pump and pulley
    • Item Weight: 3.10 Pounds
    • Item Dimensions: 7.5 x 5.6 x 4.7 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: XF5Z-3A674-BA
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2002 Mercury Villager Submodels:
    • Base, Estate, Sport | 6 Cyl 3.3 L GAS

2002 Mercury Villager Power Steering Pump

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2002 Mercury Villager Power Steering Pump available at FordPartsDeal.com. You can confidently purchase our OEM 2002 Mercury Villager Power Steering Pump as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2002 Mercury Villager Power Steering Pump Parts Q&A

  • Q: How to Maintain and Repair a Power Steering Pump and What Steps Are Involved for a 2002 Mercury Villager?
    A: Service of the power steering pump starts with eliminating the power steering pulley. First remove the high pressure hose power steering bolt and after that disconnect the hose from its fittings. You should remove the power steering return hose after unclipping its holding clamp. Unplug the power steering electrical connector then remove the rear power steering pump bolt. Take off the power steering pump front bolts before extracting the power steering pump from its position. You must replace the fittings' teflon seal of the power steering pressure hose during installation before attaching the hoses. Also check that the threads remain free from debris. The installation will end when you perform the reverse steps of removal.