My Garage
Cart

OEM 2003 Ford E-150 Blend Door Actuator

Air Blend Door Actuator
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Blend Door Actuator found

  • 2003 Ford E-150 Blend Door Actuator Diagram - XC2Z-19E616-AA
    View related parts

    2003 Ford E-150 Temperature Door Actuator Part Number: XC2Z-19E616-AA

    $62.10 MSRP: $102.18
    You Save: $40.08 (40%)
    ADD TO CART
    Product Specifications
    • Other Name: Motor Assembly; HVAC Blend Door Actuator; HVAC Heater Blend Door Actuator; Adjust Motor; Actuator
    • Replaces: 6C2Z-19E616-A, F68Z-19E616-AA, 2C2Z-19E616-AA
    • Base No.: 19E616
    • Item Weight: 0.60 Pounds
    • Item Dimensions: 5.1 x 4.5 x 3.0 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: XC2Z-19E616-AA
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2003 Ford E-150 Submodels:
    • Base, Chateau, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG

2003 Ford E-150 Blend Door Actuator

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2003 Ford E-150 Blend Door Actuator available at FordPartsDeal.com. You can confidently purchase our OEM 2003 Ford E-150 Blend Door Actuator as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2003 Ford E-150 Blend Door Actuator Parts Q&A

  • Q: How to Service and Repair the Floor/Defrost Door Blend Door Actuator on 2003 Ford E-150?
    A: Start the repair process of the air door actuator/motor for the floor/defrost door by uncoupling the battery ground cable. Before starting use a screwdriver to pry away the access panel. Start by detaching the vacuum lines before removing two screws keeping the vacuum control motor locked into place. Unfasten the vacuum control motor from the door crank by pulling on its arm before extracting the motor from its seat. The installation follows the opposite steps of removal.

Related 2003 Ford E-150 Parts