How to service the temperature blend door actuator on Ford E-150?

Begin the service of the temperature blend door actuator by disconnecting its connector. The service process begins by removing the four screws that attach the actuator before you extract the temperature blend door actuator. The installation of the new actuator should be performed by following the steps in reverse order of removal.

OEM Ford E-150 Blend Door Actuator

Air Blend Door Actuator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Blend Door Actuator found

View related parts
Ford E-150 Temperature Door Actuator
Part Number: XC2Z-19E616-AA
$62.10 MSRP: $102.18
You Save: $40.08 (40%)
ADD TO CART
Product Specifications
- Other Name: Motor Assembly; HVAC Blend Door Actuator; HVAC Heater Blend Door Actuator; Adjust Motor; Actuator
- Replaces: 6C2Z-19E616-A, F68Z-19E616-AA, 2C2Z-19E616-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2014 Ford E-150 | Base, Chateau, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG

Ford E-150 Blend Door Actuator

Welcome to our website where you can discover high-quality, genuine Ford E-150 Blend Door Actuator. We offer an extensive inventory of OEM Ford E-150 Blend Door Actuator at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford E-150 Blend Door Actuator Parts Questions & Experts Answers

Temperature Door Actuator
XC2Z-19E616-AA
Q: How to service the temperature blend door actuator on Ford E-150?
A: Begin the service of the temperature blend door actuator by disconnecting its connector. The service process begins by removing the four screws that attach the actuator before you extract the temperature blend door actuator. The installation of the new actuator should be performed by following the steps in reverse order of removal.