OEM 2003 Ford Ranger Dimmer Switch

2003 Ford Ranger Dimmer Switch Parts Questions & Experts Answers

• Q: How to service and repair the dimmer switch on 2003 Ford Ranger?

  A: The first step to service or repair the dimmer switch involves disconnected the battery ground cable. You must first remove all screws before pulling out the radio finish panel assembly and completely disconnecting and removing it from the vehicle. Begin service by first removing the hood latch release handle screws until the screws are loose. Then detach the lower instrument panel cover by removing all screws from it. The next step involves removing the lower instrument panel reinforcement by appropriate bolt removal. You should position any column gear shift lever out of the work area if it exists. Disassemble the cluster finish panel by unscrewing its screws followed by disconnecting the connectors until the panel can be removed completely. Remove the dimmer switch from the vehicle by unscrewing it. The installation requires performing all steps in reverse order of removal. The vehicle will need periods of driving for a minimum of 16 km (10 mi) after a battery disconnect due to adaptive strategy relearning following the power loss.