OEM 2003 Ford Ranger Wiper Motor

2003 Ford Ranger Wiper Motor Parts Q&A

• Q: How to Ensure Proper Functioning of the Wiper Motor on a 2003 Ford Ranger?

  A: Servicing the windshield wiper motor requires cycling the wiper blades to straight-up position followed by disconnection of the battery ground cable. The processing starts with disconnecting the electrical connector from the windshield wiper motor followed by removing the right-hand access cover through unscrewing. You need to extend your hand through the access opening until the wiper motor clip becomes free from both the right-hand mounting arm and pivot shaft. You must detach both the right-hand windshield wiper mounting arm and pivot shaft from the left-hand mounting arm and pivot shaft before moving them away from the windshield wiper motor. The windshield wiper motor can be removed through a process which starts with the removal of the stud bolt and bolts. To prevent motor damage lock the mounting arm retainer clip snugly around the motor crank pin when applying it. Reinstall the left-hand mounting arm along with the pivot shaft onto the motor before you apply the right-hand mounting arm and pivot shaft by following the reverse procedure of removal steps. The windshield wiper motor demands replacement because it cannot receive any type of repair.