How to service the windshield washer reservoir on 2003 Ford Ranger?

Service of the windshield washer reservoir starts with draining the reservoir to avoid spills of poison-containing windshield washer fluid. Begin the windshield washer service by disconnecting the washer pump hose and the overflow hose from the coolant reservoir then open its outlet port with a plug. The first step includes removing the electrical connector from the windshield washer reservoir pump followed by setting the air filter housing to the side. To remove the windshield washer reservoir you need to take out the two securing screws and two nuts followed by a careful removal of the reservoir. Take precaution during washer pump extraction from the reservoir to protect the rubber grommet. The installation procedure requires following the opposite steps of removal while separately maintaining the serviceability of the windshield washer reservoir and washer pump.

OEM 2003 Ford Ranger Washer Reservoir

Windshield Washer Reservoir

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Washer Reservoirs found

View related parts
2003 Ford Ranger Reservoir Part Number: 1L5Z-17618-AA
$86.86 MSRP: $145.82
You Save: $58.96 (41%)
ADD TO CART
Product Specifications
- Other Name: Reservoir - Water; Washer Fluid Reservoir; Windshield Washer Reservoir
- Manufacturer Note: Less pump #17664, washer tank only, refer to 8A080 for coolant tank, with 2.3, without low fluid sensor
- Base No.: 17618
- Item Weight: 2.00 Pounds
- Item Dimensions: 15.5 x 11.6 x 11.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1L5Z-17618-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Ranger Submodels:
- Edge, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS
View related parts
2003 Ford Ranger Washer Reservoir, Front Part Number: F77Z-17618-A
$62.62 MSRP: $86.63
You Save: $24.01 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Reservoir - Windshield Washer; Washer Fluid Reservoir, Front; Windshield Washer Reservoir; Coolant Reservoir; Reservoir
- Position: Front
- Replaces: F57Z-17618-BA
- Base No.: 17618
- Item Weight: 3.30 Pounds
- Item Dimensions: 9.5 x 13.1 x 10.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F77Z-17618-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Ranger Submodels:
- Edge, Splash, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS

2003 Ford Ranger Washer Reservoir

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2003 Ford Ranger Washer Reservoir available at FordPartsDeal.com. You can confidently purchase our OEM 2003 Ford Ranger Washer Reservoir as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2003 Ford Ranger Washer Reservoir Parts Q&A

Q: How to service the windshield washer reservoir on 2003 Ford Ranger?
A: Service of the windshield washer reservoir starts with draining the reservoir to avoid spills of poison-containing windshield washer fluid. Begin the windshield washer service by disconnecting the washer pump hose and the overflow hose from the coolant reservoir then open its outlet port with a plug. The first step includes removing the electrical connector from the windshield washer reservoir pump followed by setting the air filter housing to the side. To remove the windshield washer reservoir you need to take out the two securing screws and two nuts followed by a careful removal of the reservoir. Take precaution during washer pump extraction from the reservoir to protect the rubber grommet. The installation procedure requires following the opposite steps of removal while separately maintaining the serviceability of the windshield washer reservoir and washer pump.