My Garage
Cart

OEM 2003 Ford Ranger Washer Pump

Windshield Washer Pump
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Washer Pump found

  • 2003 Ford Ranger Washer Pump Diagram - 7R3Z-17664-A
    View related parts

    2003 Ford Ranger Washer Pump Part Number: 7R3Z-17664-A

    $21.27 MSRP: $34.31
    You Save: $13.04 (39%)
    ADD TO CART
    Product Specifications
    • Other Name: Motor And Pump Assembly; Windshield Washer Pump; Washer Pump Repair Kit; Front Washer Pump; Rear Washer Pump
    • Replaces: 6F1Z-17664-A
    • Base No.: 17664
    • Item Weight: 0.40 Pounds
    • Item Dimensions: 6.2 x 4.2 x 4.1 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 7R3Z-17664-A
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2003 Ford Ranger Submodels:
    • Edge, FX4, Splash, Sport, STX, Tremor, XL, XLT | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 4.0 L GAS

2003 Ford Ranger Washer Pump

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2003 Ford Ranger Washer Pump available at FordPartsDeal.com. You can confidently purchase our OEM 2003 Ford Ranger Washer Pump as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2003 Ford Ranger Washer Pump Parts Q&A

  • Q: How to service the windshield washer pump and reservoir on 2003 Ford Ranger?
    A: Draining the windshield washer reservoir should be the first step to start servicing the pump and reservoir while the hose must be removed from the pump. After you disconnect the coolant overflow hose from the engine coolant overflow reservoir you need to plug the outlet port. Unplug the electrical connector on the windshield washer reservoir pump before setting the air filter housing to the side. Wash and remove the windshield washer reservoir by taking out the two screws combined with two nuts prior to removing it gently. Pay attention to the international standards when plucking the washer pump from its reservoir because damage to the rubber grommet could occur. To install the system reverse the uninstallation sequence by servicing both the windshield washer reservoir and pump separately.