How to service and repair the brake caliper on 2003 Ford Taurus?

Brake fluid drainage from a disc brake caliper needs to start with DOT 3 or DOT 4 approved brake fluid as only these fluids are acceptable to avoid permanent harm to brake components. A vise secures the caliper while you force the piston out through the fluid port by applying low air pressure to its port after setting a wood block between the caliper bridge and piston. Discard the piston seals and dust boots when handling removal of the piston and avoid honing the caliper bores because caliper pistons do not come with honing capability. The front disc brake calipers require new caliper seal kits while damaged caliper bores need replacement of the complete front disc brake caliper. The assembling process requires fresh piston seals and dust boots together with new brake fluid as a prevention measure against vehicle damage while employing DOT 3 or DOT 4 brake fluid that meets Ford specification SAE J1704 when DOT 3 fluid types are not accessible. High Performance DOT 3 Motor Vehicle Brake Fluid C6AZ-19542-AB and other DOT 3 counterparts at Ford specification ESA-M6C25-A should be used to lubricate all components including the piston dust boot, piston seal, caliper piston, and caliper bore. Install the caliper piston seal and dust boot while handling them carefully for seal and boot protection before pressing the caliper piston into the caliper bore evenly to prevent cocking.

OEM 2003 Ford Taurus Brake Caliper

Caliper

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Brake Calipers found

View related parts
2003 Ford Taurus Caliper Assembly, Rear Driver Side Part Number: 1F1Z-2553-BA
$85.93 MSRP: $114.07
You Save: $28.14 (25%)
ADD TO CART
Product Specifications
- Other Name: Caliper Assembly - Brake; Disc Brake Caliper, Rear Left; Brake Caliper Repair Kit; Caliper; Caliper Assembly - Brake - Less Pads; Brake Caliper
- Manufacturer Note: LH Less pads, 4 wheel disc
- Position: Rear Driver Side
- Base No.: 2553
- Item Weight: 7.30 Pounds
- Item Dimensions: 5.1 x 7.7 x 7.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1F1Z-2553-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Taurus Submodels:
- G, GL, LX, SE, SE Comfort, SEL, SES, SHO, SVG | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 3.4 L GAS
View related parts
2003 Ford Taurus Caliper Assembly, Rear Passenger Side Part Number: 1F1Z-2552-BA
Product Specifications
- Other Name: Caliper Assembly - Brake - Less Pad; Disc Brake Caliper, Rear Right; Brake Caliper Repair Kit; Caliper; Caliper Assembly - Brake - Less Pads; Brake Caliper
- Manufacturer Note: RH Less pads, 4 wheel disc
- Position: Rear Passenger Side
- Replaces: 1F1Z-2552-AA, F8DZ-2552-AA, YF3Z-2552-AA, YF1Z-2552-AA, XF1Z-2552-AA
- Base No.: 2552
- Item Weight: 8.40 Pounds
- Item Dimensions: 14.3 x 14.6 x 8.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1F1Z-2552-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Taurus Submodels:
- G, GL, LX, SE, SE Comfort, SEL, SES, SHO, SVG | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 3.4 L GAS
View related parts
2003 Ford Taurus Caliper, Rear Passenger Side Part Number: 2F1Z-2552-AA
Product Specifications
- Other Name: Housing; Disc Brake Caliper, Rear Right; Brake Caliper Repair Kit; Brake Caliper
- Manufacturer Note: RH - With pads, 4 wheel disc
- Position: Rear Passenger Side
- Base No.: 2552
- Item Weight: 7.80 Pounds
- Item Dimensions: 3.6 x 5.5 x 6.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2F1Z-2552-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Taurus Submodels:
- LX, SE, SE Comfort, SEL, SES | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2003 Ford Taurus Caliper, Front Driver Side Part Number: 3F1Z-2B121-BA
Product Specifications
- Other Name: Caliper With Pads; Disc Brake Caliper, Front Left; Brake Caliper Repair Kit; Brake Caliper
- Manufacturer Note: LH - with pads & bracket. 1 kit required per vehicle (to be used for R.H. and L.H. calipers), Before 4-26-2004
- Position: Front Driver Side
- Base No.: 2B121
- Item Weight: 14.50 Pounds
- Item Dimensions: 5.3 x 6.5 x 7.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3F1Z-2B121-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Taurus Submodels:
- LX, SE, SE Comfort, SEL, SES | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2003 Ford Taurus Caliper, Front Passenger Side Part Number: 3F1Z-2B120-BA
Product Specifications
- Other Name: Caliper With Pads; Disc Brake Caliper, Front Right; Brake Caliper Repair Kit; Brake Caliper
- Manufacturer Note: RH - with pads & bracket. 1 kit required per vehicle (to be used for R.H. and L.H. calipers), Before 4-26-2004
- Position: Front Passenger Side
- Base No.: 2B120
- Item Weight: 15.00 Pounds
- Item Dimensions: 5.2 x 6.3 x 7.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3F1Z-2B120-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Taurus Submodels:
- LX, SE, SE Comfort, SEL, SES | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2003 Ford Taurus Caliper, Rear Driver Side Part Number: 2F1Z-2553-AA
Product Specifications
- Other Name: Housing; Disc Brake Caliper, Rear Left; Brake Caliper Repair Kit; Brake Caliper
- Manufacturer Note: LH - With pads, 4 wheel disc
- Position: Rear Driver Side
- Base No.: 2553
- Item Weight: 7.30 Pounds
- Item Dimensions: 4.8 x 6.9 x 8.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2F1Z-2553-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2003 Ford Taurus Submodels:
- LX, SE, SE Comfort, SEL, SES | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

2003 Ford Taurus Brake Caliper

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2003 Ford Taurus Brake Caliper available at FordPartsDeal.com. You can confidently purchase our OEM 2003 Ford Taurus Brake Caliper as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2003 Ford Taurus Brake Caliper Parts Q&A

Q: How to service and repair the brake caliper on 2003 Ford Taurus?
A: Brake fluid drainage from a disc brake caliper needs to start with DOT 3 or DOT 4 approved brake fluid as only these fluids are acceptable to avoid permanent harm to brake components. A vise secures the caliper while you force the piston out through the fluid port by applying low air pressure to its port after setting a wood block between the caliper bridge and piston. Discard the piston seals and dust boots when handling removal of the piston and avoid honing the caliper bores because caliper pistons do not come with honing capability. The front disc brake calipers require new caliper seal kits while damaged caliper bores need replacement of the complete front disc brake caliper. The assembling process requires fresh piston seals and dust boots together with new brake fluid as a prevention measure against vehicle damage while employing DOT 3 or DOT 4 brake fluid that meets Ford specification SAE J1704 when DOT 3 fluid types are not accessible. High Performance DOT 3 Motor Vehicle Brake Fluid C6AZ-19542-AB and other DOT 3 counterparts at Ford specification ESA-M6C25-A should be used to lubricate all components including the piston dust boot, piston seal, caliper piston, and caliper bore. Install the caliper piston seal and dust boot while handling them carefully for seal and boot protection before pressing the caliper piston into the caliper bore evenly to prevent cocking.