Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2004 Ford E-250 Mass Air Flow Sensor

MAF Sensor Meter
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Mass Air Flow Sensors found

  • 2004 Ford E-250 Mass Air Flow Sensor - 3L3Z-12B579-BA
    2004 Ford E-250 Mass Air Flow Sensor Diagram - 3L3Z-12B579-BA
    View related parts

    2004 Ford E-250 Mass Air Flow Sensor
    Part Number: 3L3Z-12B579-BA

    $156.67 MSRP: $257.78
    You Save: $101.11 (40%)
    ADD TO CART
    Product Specifications
    • Other Name: Sensor Assembly; Air Charge Temperature Sensor; Intake Air Temperature Sensor; MAF Sensor; Sensor
    • Manufacturer Note: 4.6L, Police
    • Base No.: 12B579
    • Item Weight: 1.20 Pounds
    • Item Dimensions: 6.3 x 2.5 x 2.5 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 3L3Z-12B579-BA
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2004 Ford E-250 Submodels:
    • Base | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG
  • 2004 Ford E-250 Mass Air Flow Sensor - YC2Z-12B579-BBRM
    2004 Ford E-250 Mass Air Flow Sensor Diagram - YC2Z-12B579-BBRM
    View related parts

    2004 Ford E-250 Mass Air Flow Sensor
    Part Number: YC2Z-12B579-BBRM

    Product Specifications
    • Other Name: Sensor Assembly; MAF Sensor Assembly; MAF Sensor; Air Mass Sensor; Sensor
    • Replaces: YC2Z-12B579-BA, YC2Z-12B579-BARM
    • Base No.: 12B579
    • Item Weight: 1.00 Pounds
    • Item Dimensions: 6.3 x 5.9 x 4.9 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: YC2Z-12B579-BBRM
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2004 Ford E-250 Submodels:
    • Base | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS

2004 Ford E-250 Mass Air Flow Sensor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2004 Ford E-250 Mass Air Flow Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2004 Ford E-250 Mass Air Flow Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2004 Ford E-250 Mass Air Flow Sensor Parts Questions & Experts Answers

  • Q: How is the Mass Air Flow Sensor Serviced on 2004 Ford E-250?
    A: Service of the Mass Air Flow (MAF) sensor starts with disconnecting the battery ground cable followed by removing the air cleaner assembly through releasing the air cleaner clamp then separating the inlet side from the outlet side. Avoid touching the MAF sensing elements since doing so can cause the unit to fail. A unit consisting of the MAF sensor and body needs service calibration at once. isolating the MAF sensor from the MAF sensor plate requires first unplugging the electric connector and removing two nuts. The engine air cleaner housing extension harness must have its grommet seated properly to stop unmetered air from reaching the engine. The engine air cleaner inlet and outlet sides must be aligned properly through the use of the alignment notch. Position the electrical connector of the MAF sensor with its opening facing up before reinstallation. Also be sure to check that none of the wires remain stuck behind the sensor. To finish the installation proceed through the reverse steps of removal.

Related 2004 Ford E-250 Parts

Alternate Year Models

+
2003 Ford E-250 Mass Air Flow Sensor 2005 Ford E-250 Mass Air Flow Sensor