FordParts
My Garage
My Account
Cart
OEM 2004 Ford Excursion Crankshaft Position Sensor
Engine Crankshaft Position Sensor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Crankshaft Position Sensors found
2004 Ford Excursion Crankshaft Position Sensor Part Number: 1W7Z-6C315-AB
$41.11 MSRP: $65.27You Save: $24.16 (38%)Ships in 1 Business DayProduct Specifications- Other Name: Sensor - Crankshaft Position; Engine Crankshaft Position Sensor; Crankshaft Sensor; Position Sensor; Sensor - Crankshaft Position - Cps
- Manufacturer Note: Sensor asy. (Crankshaft position) #1W7E 6C315-AA
- Replaces: 1W7Z-6C315-AA
- Base No.: 6C315
- Item Weight: 0.30 Pounds
- Item Dimensions: 8.1 x 6.2 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1W7Z-6C315-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2004 Ford Excursion Crankshaft Position Sensor Part Number: 3C3Z-6C315-AA
$53.04 MSRP: $87.27You Save: $34.23 (40%)Ships in 1 Business DayProduct Specifications- Other Name: Sensor - Crankshaft Position; Engine Crankshaft Position Sensor; Crankshaft Sensor; Sensor - Crankshaft Position - Cps
- Base No.: 6C315
- Item Weight: 0.30 Pounds
- Item Dimensions: 6.2 x 4.1 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3C3Z-6C315-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2004 Ford Excursion Crankshaft Position Sensor
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2004 Ford Excursion Crankshaft Position Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2004 Ford Excursion Crankshaft Position Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2004 Ford Excursion Crankshaft Position Sensor Parts Q&A
- Q: How to Service the Crankshaft Position Sensor on 2004 Ford Excursion?A: Service of the crankshaft position (CKP) sensor requires you to disconnect the battery ground cable and remove the accessory drive belt from the A/C compressor pulley first. First elevate the vehicle then disconnect the wiring harness connector from both the CKP sensor and A/C compressor field coil electrical connector. There is no need to completely remove the A/C compressor bolts because loosing them is sufficient to let the compressor slide one inch for CKP sensor work. Disconnect the bolt securing the CKP sensor before pulling out the sensor. Replace the installed components in the reverse order during installation.