Other Name: Motor Assembly - Wiper; Windshield Wiper Linkage; Wiper Motor; Motor & Linkage; Front Motor; Wiper Linkage
Manufacturer Note: Windshield Wiper, Includes Motor And Linkage
Replaces: 6L1Z-17508-BA, 2L1Z-17508-AB
Base No.: 17508A
Item Weight: 7.10 Pounds
Item Dimensions: 10.4 x 9.0 x 38.2 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 8L1Z-17508-A
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2004 Ford Expedition Submodels:
Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, NBX, Platinum, SSV, XL, XLS, XLT, XLT Sport | 6 Cyl 3.5 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
Other Name: Motor Assembly - Wiper; Back Glass Wiper Motor; Rear Motor; Motor
Manufacturer Note: Service Kit
Replaces: 2L1Z-17508-BA
Base No.: 17508
Item Weight: 4.60 Pounds
Item Dimensions: 5.9 x 6.2 x 15.4 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 6L1Z-17508-AA
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2004 Ford Expedition Submodels:
Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, NBX, Platinum, SSV, XL, XLS, XLT, XLT Sport | 6 Cyl 3.5 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
2004 Ford Expedition Wiper Motor
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2004 Ford Expedition Wiper Motor available at FordPartsDeal.com. You can confidently purchase our OEM 2004 Ford Expedition Wiper Motor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2004 Ford Expedition Wiper Motor Parts Questions & Experts Answers
Q: How to service the rear window wiper motor on 2004 Ford Expedition?
A: You should start servicing the rear window wiper motor by taking out the rear wiper pivot arm together with the dust boot cover. The service begins by detaching the nut that anchors the pivot shaft and handle from the rear window wiper. Proceed to open the liftgate. The service process starts with rear window striker and wiper pivot shaft assembly removal together with their companion nuts followed by removal of liftgate trim panel. The liftgate window should be shut before you disassemble the liftgate window glass latch only when installing a new rear wiper motor. Unplug the electrical wiring connector then remove all the bolts before pulling out the rear window wiper motor unit. Installation of new motor starts with the liftgate window glass latch where you should verify an audible click indicates that the striker engages the latch. Push the rear window wiper striker along with pivot shaft assembly into the wiper motor until you align the pivot shaft pin with the motor disc opening. The new motor assembly includes a rear window wiper motor alignment tool for fitting it over the motor disc and striker assembly when its clips are tightly secured in position. The installation of the rear wiper motor requires torque tightening of its bolts while you establish electrical connections. The procedure requires users to first close the liftgate glass while operating the liftgate. Next they should install the rear window wiper striker and wiper pivot arm mounting assembly nuts before closing the liftgate. The procedure begins with closing the liftgate before tightening the rear window wiper pivot shaft nut. After that, install the handle while also placing the dust boot cover. Finish by mounting the rear wiper pivot arm. After completing the installation of the liftgate trim panel users should open the liftgate remove the rear window wiper motor aligning tool to access the liftgate glass opening before final installation concludes. A normal operation test should be conducted on the liftgate and its glass.