Other Name: Motor Assembly - Wiper; Windshield Wiper Linkage; Wiper Motor; Motor & Linkage; Front Motor; Wiper Linkage
Manufacturer Note: Windshield Wiper, Includes Motor And Linkage
Replaces: 6L1Z-17508-BA, 2L1Z-17508-AB
Base No.: 17508A
Item Weight: 7.10 Pounds
Item Dimensions: 10.4 x 9.0 x 38.2 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 8L1Z-17508-A
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2005 Ford Expedition Submodels:
Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, NBX, Platinum, SSV, XL, XLS, XLT, XLT Sport | 6 Cyl 3.5 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
Other Name: Motor Assembly - Wiper; Back Glass Wiper Motor; Rear Motor; Motor
Manufacturer Note: Service Kit
Replaces: 2L1Z-17508-BA
Base No.: 17508
Item Weight: 4.60 Pounds
Item Dimensions: 5.9 x 6.2 x 15.4 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 6L1Z-17508-AA
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2005 Ford Expedition Submodels:
Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL Platinum, EL SSV, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, NBX, Platinum, SSV, XL, XLS, XLT, XLT Sport | 6 Cyl 3.5 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
2005 Ford Expedition Wiper Motor
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford Expedition Wiper Motor available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford Expedition Wiper Motor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2005 Ford Expedition Wiper Motor Parts Q&A
Q: How to service the windshield wiper motor on 2005 Ford Expedition?
A: As a first step for servicing the windshield wiper motor you must take out the mounting arm together with the pivot shaft. The windshield wiper motor crank needs to be marked for correct alignment positioning before disconnection because it will be reinstalled later. Marking the crank position first then disconnect it and remove the bolt that secures the motor unit. The service of the windshield wiper motor starts after removing all mounting bolts. Proper installation of windshield wiper mounting arm and pivot shaft requires the windshield wiper motor crank to be installed at the same position. The installation ends by performing the reverse steps of the removal process.