My Garage
Cart

OEM 2004 Ford F-150 Heritage Transmitter

Car Key
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Transmitter found

  • 2004 Ford F-150 Heritage Transmitter Diagram - 8L3Z-15K601-B
    View related parts

    2004 Ford F-150 Heritage Transmitter Part Number: 8L3Z-15K601-B

    $65.53 MSRP: $75.00
    You Save: $9.47 (13%)
    Ships in 1 Business Day
    ADD TO CART
    Product Specifications
    • Other Name: Remote Control System; Keyless Entry Transmitter; Transceiver
    • Replaces: 2L3Z-15K601-AA, 2L3Z-15K601-AB, 8L3Z-15K601-AA
    • Base No.: 15K601
    • Item Weight: 0.30 Pounds
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 8L3Z-15K601-B
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2004 Ford F-150 Heritage Submodels:
    • SVT Lightning, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L BI-FUEL, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L GAS

2004 Ford F-150 Heritage Transmitter

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2004 Ford F-150 Heritage Transmitter available at FordPartsDeal.com. You can confidently purchase our OEM 2004 Ford F-150 Heritage Transmitter as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2004 Ford F-150 Heritage Transmitter Parts Q&A

  • Q: How to program the keyless entry remote transmitters on 2004 Ford F-150 Heritage?
    A: All keyless entry remote transmitters need programming in a single session to function correctly. Start by using the remote transmitter to electronically unlock the vehicle and also enable the keyless entry keypad (if present) or door lock control switch when the driver door stays open. You should turn the key from OFF to RUN eight times in less than 10 seconds, finishing on RUN to enter program mode successfully; this activation will lead to all doors locking before unlocking. Each remote transmitter should be used to press any button within 20 seconds for confirmation of successful programming by causing the doors to lock then unlock. Wait several seconds before attempting to press the button once more when door locks give no response. An inspection with verification must be performed after trying twice to test the remote transmitter. Look for possible failures and check the limitation of remote transmitters. The key turning to OFF position and reaching 20 seconds since entering program mode or programming any transmitter will cause a program mode exit.