OEM Ford F-150 Heritage Transmitter

Ford F-150 Heritage Transmitter Parts Questions & Experts Answers

• Transmitter
  8L3Z-15K601-B
  Q: How to program the keyless entry remote transmitters on Ford F-150 Heritage?

  A: All keyless entry remote transmitters need programming in a single session to function correctly. Start by using the remote transmitter to electronically unlock the vehicle and also enable the keyless entry keypad (if present) or door lock control switch when the driver door stays open. You should turn the key from OFF to RUN eight times in less than 10 seconds, finishing on RUN to enter program mode successfully; this activation will lead to all doors locking before unlocking. Each remote transmitter should be used to press any button within 20 seconds for confirmation of successful programming by causing the doors to lock then unlock. Wait several seconds before attempting to press the button once more when door locks give no response. An inspection with verification must be performed after trying twice to test the remote transmitter. Look for possible failures and check the limitation of remote transmitters. The key turning to OFF position and reaching 20 seconds since entering program mode or programming any transmitter will cause a program mode exit.