FordParts
My Garage
My Account
Cart
OEM 2004 Mercury Sable ABS Control Module
Anti Lock Brake Control Module- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
5 ABS Control Modules found
2004 Mercury Sable Control Module Part Number: 4F1Z-2C219-AA
Product Specifications- Other Name: Control; ABS Control Module; ABS Control Unit
- Manufacturer Note: ABS only
- Base No.: 2C219
- Item Weight: 1.70 Pounds
- Item Dimensions: 9.3 x 7.1 x 7.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4F1Z-2C219-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2004 Mercury Sable Control Module Part Number: YF1Z-2C286-CA
Product Specifications- Other Name: Control; ABS Hydraulic Assembly; ABS Control Module
- Base No.: 2C286
- Item Weight: 5.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YF1Z-2C286-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2004 Mercury Sable Control Module Part Number: YF1Z-2C286-BA
Product Specifications- Other Name: Control Assembly - ABS Hydraulic; ABS Hydraulic Assembly; ABS Control Module; Hydraulic Control Unit; Control Assembly - ABS Hydraulics
- Manufacturer Note: HCU, ABS & traction assist
- Base No.: 2C286
- Item Weight: 6.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YF1Z-2C286-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2004 Mercury Sable Control Module Part Number: YF1Z-2C286-AA
Product Specifications- Other Name: Control Assembly - ABS Hydraulic; ABS Hydraulic Assembly; ABS Control Module; Hydraulic Control Unit; Control Assembly - ABS Hydraulics
- Manufacturer Note: HCU, ABS only
- Base No.: 2C286
- Item Weight: 5.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YF1Z-2C286-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2004 Mercury Sable Control Module Part Number: 4F1Z-2C219-BA
Product Specifications- Other Name: Control; ABS Control Module; ABS Control Unit
- Manufacturer Note: ABS & traction assist, Less Advance Trac
- Replaces: 2F1Z-2C219-A
- Base No.: 2C219
- Item Weight: 1.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4F1Z-2C219-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2004 Mercury Sable ABS Control Module
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2004 Mercury Sable ABS Control Module available at FordPartsDeal.com. You can confidently purchase our OEM 2004 Mercury Sable ABS Control Module as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2004 Mercury Sable ABS Control Module Parts Q&A
- Q: How to Service and Repair the ABS Control Module on 2004 Mercury Sable?A: The service process of Electronic Brake Control Module and Anti-Lock Brake System (ABS) Module requires removing the battery tray along with its bracket. First detach the wiring connector lock then take off the wires. After breaking the brake lines disconnect the bolts that fasten the ABS module and hydraulic control unit assembly. Remove the ABS control module by first taking out its screws followed by unfastening the bracket nuts. Reverse the uninstallation steps and complete brake system bleeding before restarting operation. Brake fluid damage to components occurs when using any fluid other than DOT 3 brake fluid since this will lead to permanent failure of brake components which disables the braking system. Handle brake fluid with caution while preventing both eyes and paint and plastic surfaces from contact and maintain reservoir fluid level with DOT 3 brake fluid to prevent the master cylinder from drying out during the bleeding process. Never reuse drained brake fluid.