How to service and repair the rear brake pads on 2005 Ford E-150?

Start service and repair of E-150 rear brake pads after cleaning the area while removing the brake cylinder filler cap to check the master cylinder reservoir for adequate brake fluid. The fluid level should be maintained at half full after removing excess liquid. You should first take out the wheel along with the tire before examining brake pads for wear and contamination or any failures to specification. Replace broken brake pads when necessary. After bolt removal from the caliper pin avoid allowing the rear disc brake caliper to suspend from the brake hose through appropriate support and caliper placement. The brake pad clips and pads need removal before the rear brake disc thickness measurement and a new replacement disk must be fitted when current disc specifications are not met. A suitable instrument should be used to drive brake caliper pistons inside the bore when installing new brake pads. The inspection of the rear disc brake caliper should include checking for leaks; disassembly will be needed if leaks are detected. The installation will finish with the opposite actions of removal.

OEM 2005 Ford E-150 Brake Pads

Disc Brake Pad Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Brake Pads found

View related parts
2005 Ford E-150 Brake Pads, Rear
Part Number: 2U2Z-2V001-VB
$45.07 MSRP: $66.65
You Save: $21.58 (33%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Kit - Brake Lining; Disc Brake Pad Set, Rear; Disc Brake Pad Set; Front Pads
- Position: Rear
- Replaces: 1C2Z-2001-BA, 2U2Z-2V001-VA, 4C2Z-2001-BB, BRF-655, XU2Z-2V001-ASA, BR-48-B
- Base No.: 2001
- Item Weight: 6.40 Pounds
- Item Dimensions: 2.6 x 9.0 x 10.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2U2Z-2V001-VB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford E-150 Submodels:
- Base, Chateau, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2005 Ford E-150 Front Pads
Part Number: 1U2Z-2V001-MA
$7.89 MSRP: $10.92
You Save: $3.03 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad; Brake Pads
- Base No.: 2V001
- Item Weight: 2.90 Pounds
- Item Dimensions: 2.6 x 4.0 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1U2Z-2V001-MA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford E-150 Submodels:
- Base, Chateau, XL, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2005 Ford E-150 Rear Pads
Part Number: 5U2Z-2V200-FA
$36.74 MSRP: $49.99
You Save: $13.25 (27%)
ADD TO CART
Product Specifications
- Other Name: Kit - Brake Shoe And Lining; Disc Brake Pad Set, Rear; Brake Pads
- Position: Rear
- Replaces: 5C2Z-2200-A, 4C2Z-2200-AA, BRF-1417
- Base No.: 2200
- Item Weight: 3.70 Pounds
- Item Dimensions: 2.6 x 5.4 x 8.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5U2Z-2V200-FA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford E-150 Submodels:
- Base, Chateau, XL, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS

2005 Ford E-150 Brake Pads

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford E-150 Brake Pads available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford E-150 Brake Pads as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2005 Ford E-150 Brake Pads Parts Questions & Experts Answers

Q: How to service and repair the rear brake pads on 2005 Ford E-150?
A: Start service and repair of E-150 rear brake pads after cleaning the area while removing the brake cylinder filler cap to check the master cylinder reservoir for adequate brake fluid. The fluid level should be maintained at half full after removing excess liquid. You should first take out the wheel along with the tire before examining brake pads for wear and contamination or any failures to specification. Replace broken brake pads when necessary. After bolt removal from the caliper pin avoid allowing the rear disc brake caliper to suspend from the brake hose through appropriate support and caliper placement. The brake pad clips and pads need removal before the rear brake disc thickness measurement and a new replacement disk must be fitted when current disc specifications are not met. A suitable instrument should be used to drive brake caliper pistons inside the bore when installing new brake pads. The inspection of the rear disc brake caliper should include checking for leaks; disassembly will be needed if leaks are detected. The installation will finish with the opposite actions of removal.