How to service and repair the rear bumper cover on 2005 Ford Escape?

Begin bumper cover service by putting tape at all corners of the cover and headlamp area for paint protection. It is vital to carefully take out the right-hand outer bumper cover mount that surrounds the exhaust pipe since breaking it could occur. Under each side remove two bumper cover-to-splash shield bolts then tighten them to 8 Nm (71 lb-in) before final installation. Alleviate damage to the mounts by being cautious while removing the rear bumper pin-type retainers but remove center pin-type retainer pairs followed by the outer pairs and then the six rear bumper cover screws. The installation task requires removal of two liftgate alignment bumper bolts then two liftgate alignment bumpers and reinstallation at 8 Nm (71 lb-in). Remove the rear bumper cover only after disconnecting the parking aid system electrical connector. Start with the correct positioning of the bumper cover into the bumper slides before performing the installation procedure in reverse order.

OEM 2005 Ford Escape Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Bumpers found

View related parts
2005 Ford Escape Bumper Cover, Front Part Number: 5L8Z-17D957-BAA
$171.75 MSRP: $265.05
You Save: $93.30 (36%)
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Front
- Position: Front
- Base No.: 17D957
- Item Weight: 11.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L8Z-17D957-BAA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Escape Submodels:
- Hybrid, XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
2005 Ford Escape Reinforcement, Front Part Number: 9L8Z-17757-A
$75.03 MSRP: $115.47
You Save: $40.44 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Cover Reinforcement Beam, Front; Bumper Cover Reinforcement, Front
- Position: Front
- Replaces: YL8Z-17757-AA, 5L8Z-17757-AA
- Base No.: 17757
- Item Weight: 8.30 Pounds
- Item Dimensions: 5.2 x 45.5 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9L8Z-17757-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Escape Submodels:
- Hybrid, Limited, Limited Hybrid, XLS, XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2005 Ford Escape Bumper Cover, Front Part Number: 5L8Z-17D957-DAA
$195.39 MSRP: $304.35
You Save: $108.96 (36%)
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Front
- Position: Front
- Base No.: 17D957
- Item Weight: 9.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L8Z-17D957-DAA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Escape Submodels:
- Hybrid, Limited, XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
2005 Ford Escape Bumper Cover, Rear Part Number: 5L8Z-17K835-AAA
$196.87 MSRP: $286.57
You Save: $89.70 (32%)
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Position: Rear
- Base No.: 17K835
- Item Weight: 10.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L8Z-17K835-AAA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Escape Submodels:
- Hybrid, Limited, XLS, XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
2005 Ford Escape Bumper Cover, Rear Part Number: 5L8Z-17K835-DAA
$174.92 MSRP: $254.62
You Save: $79.70 (32%)
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Position: Rear
- Base No.: 17K835
- Item Weight: 12.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L8Z-17K835-DAA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Escape Submodels:
- Hybrid, Limited, XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
2005 Ford Escape Bumper Cover, Front Part Number: 5L8Z-17D957-AAA
Product Specifications
- Other Name: Cover; Bumper Cover, Front
- Position: Front
- Base No.: 17D957
- Item Weight: 11.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L8Z-17D957-AAA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Escape Submodels:
- XLS | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
2005 Ford Escape Bumper Cover, Front Part Number: 5L8Z-17D957-CAA
Product Specifications
- Other Name: Cover; Bumper Cover, Front
- Manufacturer Note: Medium Dark Platinum
- Position: Front
- Base No.: 17D957
- Item Weight: 10.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L8Z-17D957-CAA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Escape Submodels:
- XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS

2005 Ford Escape Bumper

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford Escape Bumper available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford Escape Bumper as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2005 Ford Escape Bumper Parts Q&A

Q: How to service and repair the rear bumper cover on 2005 Ford Escape?
A: Begin bumper cover service by putting tape at all corners of the cover and headlamp area for paint protection. It is vital to carefully take out the right-hand outer bumper cover mount that surrounds the exhaust pipe since breaking it could occur. Under each side remove two bumper cover-to-splash shield bolts then tighten them to 8 Nm (71 lb-in) before final installation. Alleviate damage to the mounts by being cautious while removing the rear bumper pin-type retainers but remove center pin-type retainer pairs followed by the outer pairs and then the six rear bumper cover screws. The installation task requires removal of two liftgate alignment bumper bolts then two liftgate alignment bumpers and reinstallation at 8 Nm (71 lb-in). Remove the rear bumper cover only after disconnecting the parking aid system electrical connector. Start with the correct positioning of the bumper cover into the bumper slides before performing the installation procedure in reverse order.