How to service and repair the rear bumper cover on 2006 Ford Escape?

Begin service and repair of rear bumper cover by placing tape at its corners and points below the headlamps to prevent any paint scratches. It is essential to handle the rear bumper cover carefully during installation and removal on Mariner vehicles because the RH outer bumper cover mount near the exhaust pipe has the potential to break. Operation starts with removing two rear bumper cover-to-splash shield bolts while setting their torque to 8 Nm (71 lb-in) after installation. Take utmost care while removing the two center while also removing the two pin-type retainers from the outer rear bumper cover and avoid damaging its mounts in the process. After removing six rear bumper cover screws the installer must disconnect the two liftgate alignment bumper bolts and their corresponding alignment bumpers before securing them back with 8 Nm (71 lb-in) torque during reassembly. Remove the rear bumper cover only when the vehicle includes parking aid system components and disconnect the electrical connector first. Reinstallation of the rear bumper cover requires performing the reverse of removal steps while guiding it properly into its bumper slides.

OEM 2006 Ford Escape Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Bumpers found

View related parts
2006 Ford Escape Bumper Cover, Front Part Number: 5L8Z-17D957-BAA
$171.75 MSRP: $265.05
You Save: $93.30 (36%)
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Front
- Position: Front
- Base No.: 17D957
- Item Weight: 11.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L8Z-17D957-BAA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Escape Submodels:
- Hybrid, XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
2006 Ford Escape Reinforcement, Front Part Number: 9L8Z-17757-A
$75.03 MSRP: $115.47
You Save: $40.44 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Cover Reinforcement Beam, Front; Bumper Cover Reinforcement, Front
- Position: Front
- Replaces: YL8Z-17757-AA, 5L8Z-17757-AA
- Base No.: 17757
- Item Weight: 8.30 Pounds
- Item Dimensions: 5.2 x 45.5 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9L8Z-17757-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Escape Submodels:
- Hybrid, Limited, Limited Hybrid, XLS, XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS
View related parts
2006 Ford Escape Bumper Cover, Front Part Number: 5L8Z-17D957-DAA
$195.39 MSRP: $304.35
You Save: $108.96 (36%)
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Front
- Position: Front
- Base No.: 17D957
- Item Weight: 9.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L8Z-17D957-DAA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Escape Submodels:
- Hybrid, Limited, XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
2006 Ford Escape Bumper Cover, Rear Part Number: 5L8Z-17K835-AAA
$196.87 MSRP: $286.57
You Save: $89.70 (32%)
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Position: Rear
- Base No.: 17K835
- Item Weight: 10.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L8Z-17K835-AAA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Escape Submodels:
- Hybrid, Limited, XLS, XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
2006 Ford Escape Bumper Cover, Rear Part Number: 5L8Z-17K835-DAA
$174.92 MSRP: $254.62
You Save: $79.70 (32%)
Product Specifications
- Other Name: Cover; Bumper Cover, Rear
- Position: Rear
- Base No.: 17K835
- Item Weight: 12.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L8Z-17K835-DAA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Escape Submodels:
- Hybrid, Limited, XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
2006 Ford Escape Bumper Cover, Front Part Number: 5L8Z-17D957-AAA
Product Specifications
- Other Name: Cover; Bumper Cover, Front
- Position: Front
- Base No.: 17D957
- Item Weight: 11.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L8Z-17D957-AAA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Escape Submodels:
- XLS | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
View related parts
2006 Ford Escape Bumper Cover, Front Part Number: 5L8Z-17D957-CAA
Product Specifications
- Other Name: Cover; Bumper Cover, Front
- Manufacturer Note: Medium Dark Platinum
- Position: Front
- Base No.: 17D957
- Item Weight: 10.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L8Z-17D957-CAA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2006 Ford Escape Submodels:
- XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS

2006 Ford Escape Bumper

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford Escape Bumper available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford Escape Bumper as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2006 Ford Escape Bumper Parts Q&A

Q: How to service and repair the rear bumper cover on 2006 Ford Escape?
A: Begin service and repair of rear bumper cover by placing tape at its corners and points below the headlamps to prevent any paint scratches. It is essential to handle the rear bumper cover carefully during installation and removal on Mariner vehicles because the RH outer bumper cover mount near the exhaust pipe has the potential to break. Operation starts with removing two rear bumper cover-to-splash shield bolts while setting their torque to 8 Nm (71 lb-in) after installation. Take utmost care while removing the two center while also removing the two pin-type retainers from the outer rear bumper cover and avoid damaging its mounts in the process. After removing six rear bumper cover screws the installer must disconnect the two liftgate alignment bumper bolts and their corresponding alignment bumpers before securing them back with 8 Nm (71 lb-in) torque during reassembly. Remove the rear bumper cover only when the vehicle includes parking aid system components and disconnect the electrical connector first. Reinstallation of the rear bumper cover requires performing the reverse of removal steps while guiding it properly into its bumper slides.