Other Name: Motor Assembly - Wiper; Back Glass Wiper Motor; Rear Motor; Wiper Motor
Manufacturer Note: Includes Cover, Pad And Retainer
Replaces: YL8Z-17508-AB
Base No.: 17508
Item Weight: 3.20 Pounds
Item Dimensions: 7.3 x 6.1 x 10.8 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 4L8Z-17508-AB
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2005 Ford Escape Submodels:
Hybrid, Limited, XLS, XLT, XLT No Boundaries, XLT Sport | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 6 Cyl 3.0 L GAS
2005 Ford Escape Wiper Motor
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford Escape Wiper Motor available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford Escape Wiper Motor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2005 Ford Escape Wiper Motor Parts Q&A
Q: How to service the rear window wiper motor on 2005 Ford Escape?
A: You must begin servicing the rear window wiper motor from the PARK position by enabling the switch ON to start and let it complete one wiping cycle. Mark the wiper blade end position on the back glass before turning OFF the switch. This will help during reinstallation. The removal of the rear pivot arm begins by elevating the component to vertical then pushing its locking tab sideways while extracting it up to detach the part. First remove both the rear wiper motor shaft nut cover along with the shaft nut for reinstalling by tightening it to 7 Nm (62 lb-in). Rear wiper motor cover removal must precede the rear wiper motor bracket nut extraction and both parts require 4 Nm (35 lb-in) torque settings when reinstalling. You should remove the bolt along with the rear wiper motor while making sure the front wiper motor gets tightened at 5 Nm (44 lb-in) during installation. Conclude by performing the opposite of removal steps and attend to the rear wiper pivot arm positioning.