How to Service and Repair the Rear ABS Sensor on 2005 Ford Excursion?

Service and repair operations on the rear ABS sensor start with disconnecting the battery then supporting and lifting the vehicle. Efforts should be made to remove all dirt and debris in the area surrounding the rear axle ABS sensor before sensor removal so that fluid contamination can be avoided. The process involves disconnecting power wires and removing the bolt before extracting the rear axle ABS sensor. When installing the sensor components, you must prevent any external dirt from entering the rear axle housing. Check the surface of the rear axle where the sensor attaches while evaluating the magnetic sector of the ABS sensor itself and replace the O-ring if it shows damages. Use rear axle lubricant to give a thin layer of lubrication to the new O-ring. Position the rear axle ABS sensor while avoiding pressure on its plastic connector before torquing down the bolt. Reconnect the electrical connector followed by reconnecting power from the battery. The car needs time to recover its adaptive strategies following battery removal and reconnection since this recovery process takes driving distances exceeding 16 km (10 mi).

OEM 2005 Ford Excursion ABS Sensor

ABS Wheel Speed Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 ABS Sensors found

View related parts
2005 Ford Excursion ABS Sensor, Front
Part Number: F81Z-2C204-BB
$74.39 MSRP: $122.40
You Save: $48.01 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Front Left, Front Right; ABS Speed Sensor; Speed Sensor; Front Speed Sensor; ABS Wheel Speed Sensor
- Position: Front
- Base No.: 2C204
- Item Weight: 4.30 Pounds
- Item Dimensions: 7.6 x 2.6 x 7.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: F81Z-2C204-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
View related parts
2005 Ford Excursion ABS Sensor, Front Passenger Side
Part Number: F81Z-2C204-AD
$64.81 MSRP: $106.64
You Save: $41.83 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Front Right; ABS Speed Sensor; Speed Sensor; Front Speed Sensor; ABS Wheel Speed Sensor
- Manufacturer Note: RH, 4x2
- Position: Front Passenger Side
- Base No.: 2C204
- Item Weight: 0.70 Pounds
- Item Dimensions: 7.5 x 2.7 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F81Z-2C204-AD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
View related parts
2005 Ford Excursion ABS Sensor, Front Driver Side
Part Number: F81Z-2C205-AD
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Front Left; Speed Sensor; Front Speed Sensor; ABS Wheel Speed Sensor
- Position: Front Driver Side
- Base No.: 2C205
- Item Weight: 0.70 Pounds
- Item Dimensions: 7.5 x 2.5 x 7.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F81Z-2C205-AD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Excursion Submodels:
- Eddie Bauer, Limited, XLS, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL

2005 Ford Excursion ABS Sensor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford Excursion ABS Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford Excursion ABS Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2005 Ford Excursion ABS Sensor Parts Questions & Experts Answers

Q: How to Service and Repair the Rear ABS Sensor on 2005 Ford Excursion?
A: Service and repair operations on the rear ABS sensor start with disconnecting the battery then supporting and lifting the vehicle. Efforts should be made to remove all dirt and debris in the area surrounding the rear axle ABS sensor before sensor removal so that fluid contamination can be avoided. The process involves disconnecting power wires and removing the bolt before extracting the rear axle ABS sensor. When installing the sensor components, you must prevent any external dirt from entering the rear axle housing. Check the surface of the rear axle where the sensor attaches while evaluating the magnetic sector of the ABS sensor itself and replace the O-ring if it shows damages. Use rear axle lubricant to give a thin layer of lubrication to the new O-ring. Position the rear axle ABS sensor while avoiding pressure on its plastic connector before torquing down the bolt. Reconnect the electrical connector followed by reconnecting power from the battery. The car needs time to recover its adaptive strategies following battery removal and reconnection since this recovery process takes driving distances exceeding 16 km (10 mi).