How to service the Yaw Sensor within the stability control sensor cluster on 2005 Ford Expedition?

To maintain the yaw rate sensor on the stability control sensor cluster, it is necessary to remove the front floor console, unscrew the two bolts and to disconnect the electrical connector. the steps should be reversed to install the new sensor. The sensor of the yaw rate combines the roll rate sensor, longitudinal accelerator, and the lateral accelerator.

OEM 2005 Ford Expedition Yaw Sensor

Yaw Rate Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Yaw Sensor found

View related parts
2005 Ford Expedition Sensor Part Number: 3L1Z-3C187-AA
Product Specifications
- Other Name: Sensor Assembly; ABS Deceleration Sensor; ABS Sensor
- Manufacturer Note: Lateral/Yaw Sensor
- Replaces: 2C5Z-3C187-AB
- Base No.: 3C187
- Item Weight: 0.70 Pounds
- Item Dimensions: 4.3 x 3.7 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3L1Z-3C187-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Expedition Submodels:
- Eddie Bauer, King Ranch, Limited, NBX, XLS, XLT, XLT Sport | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS

2005 Ford Expedition Yaw Sensor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford Expedition Yaw Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford Expedition Yaw Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2005 Ford Expedition Yaw Sensor Parts Q&A

Q: How to service the Yaw Sensor within the stability control sensor cluster on 2005 Ford Expedition?
A: To maintain the yaw rate sensor on the stability control sensor cluster, it is necessary to remove the front floor console, unscrew the two bolts and to disconnect the electrical connector. the steps should be reversed to install the new sensor. The sensor of the yaw rate combines the roll rate sensor, longitudinal accelerator, and the lateral accelerator.