FordParts
My Garage
My Account
Cart
OEM 2005 Ford Expedition ABS Sensor
ABS Wheel Speed Sensor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 ABS Sensors found
2005 Ford Expedition Speed Sensor, Rear Passenger Side Part Number: 2L1Z-2C204-BB
$40.65 MSRP: $64.55You Save: $23.90 (38%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Rear Left, Rear Right; ABS Speed Sensor; ABS Sensor; ABS Wheel Speed Sensor
- Manufacturer Note: Rear
- Position: Rear Passenger Side
- Base No.: 2C204
- Item Weight: 0.40 Pounds
- Item Dimensions: 15.6 x 11.0 x 0.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 2L1Z-2C204-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Ford Expedition Speed Sensor, Front Driver Side Part Number: 2L1Z-2C204-CA
$51.96 MSRP: $70.11You Save: $18.15 (26%)Product Specifications- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Front Left, Front Right; ABS Sensor; Sensor; ABS Wheel Speed Sensor
- Position: Front Driver Side
- Replaces: 2L1Z-2C190-AA
- Base No.: 2C204
- Item Weight: 0.60 Pounds
- Item Dimensions: 8.5 x 4.4 x 2.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 2L1Z-2C204-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Ford Expedition ABS Sensor
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford Expedition ABS Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford Expedition ABS Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2005 Ford Expedition ABS Sensor Parts Q&A
- Q: How to Service the Front ABS Sensor on 2005 Ford Expedition?A: Begin service of the front ABS sensor by first switching off any air suspension switch that exists. Putting the vehicle into neutral position before placing it on the hoist will allow for the service work to proceed. The wiring connector for the ABS sensor needs disconnection before you remove the bolt along with its retainers. Keep the caliper free from hanging against the brake hose because it creates damage potential though fitment of bolts leads to removal and storage of the caliper pad assembly. The brake disc should be separated from the front ABS sensor after which you can remove the bolt securing the sensor. The installation process simply requires performing an opposite procedure to what was done during the removal.