How to service the Yaw Sensor within the stability control sensor cluster on Ford Expedition?

To maintain the yaw rate sensor on the stability control sensor cluster, it is necessary to remove the front floor console, unscrew the two bolts and to disconnect the electrical connector. the steps should be reversed to install the new sensor. The sensor of the yaw rate combines the roll rate sensor, longitudinal accelerator, and the lateral accelerator.

How to Service and Repair the Yaw Sensor within the Stability Control Sensor Cluster on Ford Expedition?

In order to maintain the yaw rate sensor in the stability control sensor cluster, detach the electrical connector and the front floor console. Unscrew four bracket bolts, tighten upper bolts with 9 Nm and lower bolts with 40 Nm when installing. Re-tighten the two cluster bolts to 12 Nm and invert the process.

OEM Ford Expedition Yaw Sensor

Yaw Rate Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Yaw Sensors found

View related parts
Ford Expedition Sensor Part Number: 3L1Z-3C187-AA
Product Specifications
- Other Name: Sensor Assembly; ABS Deceleration Sensor; ABS Sensor
- Manufacturer Note: Lateral/Yaw Sensor
- Replaces: 2C5Z-3C187-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003-2006 Ford Expedition | Eddie Bauer, King Ranch, Limited, NBX, XLS, XLT, XLT Sport | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Yaw Rate Sensor Part Number: 7L1Z-3C187-A
Product Specifications
- Other Name: Sensor Assembly; Suspension Yaw Sensor; Steering Wheel Speed Sensor; Yaw Sensor; Sensor
- Manufacturer Note: Lateral/Yaw Sensor
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007-2010 Ford Expedition | Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, XLT | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Sensor Part Number: 3L2Z-3C187-AA
Product Specifications
- Other Name: Sensor Assembly; ABS Deceleration Sensor; Suspension Yaw Sensor; Steering Wheel Speed Sensor
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003 Ford Expedition | Eddie Bauer, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Yaw Rate Sensor Part Number: 6L2Z-3C187-AA
Product Specifications
- Other Name: Sensor Assembly; Suspension Yaw Sensor; Steering Wheel Speed Sensor; Yaw Sensor; Sensor
- Manufacturer Note: Lateral/Yaw Sensor
- Replaces: 3C5Z-3C187-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2007 Ford Expedition | Eddie Bauer, EL Eddie Bauer, EL Limited, EL XLT, Limited, XLT | 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Sensor Part Number: 2L1Z-3C296-BA
Product Specifications
- Other Name: Sensor Assembly; ABS Deceleration Sensor; ABS Sensor
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003 Ford Expedition | Eddie Bauer, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
Ford Expedition Sensor Part Number: 2L1Z-3C296-AA
Product Specifications
- Other Name: Sensor Assembly; ABS Deceleration Sensor; ABS Sensor
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 2003 Ford Expedition | Eddie Bauer, XLT | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS

Ford Expedition Yaw Sensor

Welcome to our website where you can discover high-quality, genuine Ford Expedition Yaw Sensor. We offer an extensive inventory of OEM Ford Expedition Yaw Sensor at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.

Ford Expedition Yaw Sensor Parts and Q&A

Sensor
3L1Z-3C187-AA
Q: How to service the Yaw Sensor within the stability control sensor cluster on Ford Expedition?
A: To maintain the yaw rate sensor on the stability control sensor cluster, it is necessary to remove the front floor console, unscrew the two bolts and to disconnect the electrical connector. the steps should be reversed to install the new sensor. The sensor of the yaw rate combines the roll rate sensor, longitudinal accelerator, and the lateral accelerator.
Yaw Rate Sensor
7L1Z-3C187-A
Q: How to Service and Repair the Yaw Sensor within the Stability Control Sensor Cluster on Ford Expedition?
A: In order to maintain the yaw rate sensor in the stability control sensor cluster, detach the electrical connector and the front floor console. Unscrew four bracket bolts, tighten upper bolts with 9 Nm and lower bolts with 40 Nm when installing. Re-tighten the two cluster bolts to 12 Nm and invert the process.