How to service and repair the LH rear parking brake cable on 2005 Ford Explorer?

Service and repair of the LH rear parking brake cable begins with the release of parking brake tension. The procedure starts with cable disconnection between the intermediate and LH rear cable at the cable equalizer while also removing the LH rear cable conduit front connection from the frame bracket. First disconnect the wire form retainer bolt from the lower arm before tightening it to 15 Nm (11 ft. lbs.) at the installation stage. Service and repair of the LH rear parking brake cable begins by removing the cable from the vehicle using the procedure that involves disconnecting it from the parking brake lever. The install of the new cable requires following the removal steps in reverse and testing for proper parking brake operations.

OEM 2005 Ford Explorer Parking Brake Cable

Emergency Parking Brake Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Parking Brake Cables found

View related parts
2005 Ford Explorer Rear Cable, Passenger Side Part Number: 1L2Z-2A635-BA
$21.22 MSRP: $28.87
You Save: $7.65 (27%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Manufacturer Note: Cable asy. - RH
- Position: Passenger Side
- Base No.: 2A635
- Item Weight: 2.20 Pounds
- Item Dimensions: 0.1 x 14.3 x 14.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1L2Z-2A635-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Explorer Submodels:
- Eddie Bauer, Limited, NBX, XLS, XLS Sport, XLT, XLT Sport | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2005 Ford Explorer Rear Cable, Driver Side Part Number: 2C5Z-2A635-AB
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Position: Driver Side
- Base No.: 2A635
- Item Weight: 1.30 Pounds
- Item Dimensions: 2.2 x 13.7 x 31.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2C5Z-2A635-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Explorer Submodels:
- Eddie Bauer, Limited, NBX, XLS, XLS Sport, XLT, XLT Sport | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2005 Ford Explorer Front Cable Part Number: 4L2Z-2853-BA
Product Specifications
- Other Name: Cable Assembly - Parking Brake; Brake Cable
- Replaces: 2C5Z-2853-BA
- Base No.: 2853
- Item Weight: 1.10 Pounds
- Item Dimensions: 2.2 x 13.6 x 30.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4L2Z-2853-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Explorer Submodels:
- Eddie Bauer, Limited, NBX, XLS, XLS Sport, XLT, XLT Sport | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS

2005 Ford Explorer Parking Brake Cable

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford Explorer Parking Brake Cable available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford Explorer Parking Brake Cable as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2005 Ford Explorer Parking Brake Cable Parts Q&A

Q: How to service and repair the LH rear parking brake cable on 2005 Ford Explorer?
A: Service and repair of the LH rear parking brake cable begins with the release of parking brake tension. The procedure starts with cable disconnection between the intermediate and LH rear cable at the cable equalizer while also removing the LH rear cable conduit front connection from the frame bracket. First disconnect the wire form retainer bolt from the lower arm before tightening it to 15 Nm (11 ft. lbs.) at the installation stage. Service and repair of the LH rear parking brake cable begins by removing the cable from the vehicle using the procedure that involves disconnecting it from the parking brake lever. The install of the new cable requires following the removal steps in reverse and testing for proper parking brake operations.