OEM 2005 Ford Explorer Sport Trac Blower Motor

2005 Ford Explorer Sport Trac Blower Motor Parts Questions & Experts Answers

• Q: How to service the blower motor in the second row on 2005 Ford Explorer Sport Trac?

  A: Service of the second-row blower motor starts with floor console removal after which you must take out the coin tray and unscrew the console insert. Following this step remove the console lid screw before removing other screws that may exist. The rear cup holder requires opening to reveal the screws which are necessary for removal followed by another two screws. The procedure starts with removing retaining clips from the console rear finish panel followed by disconnecting the electrical connectors then releasing the pin-type retainer. Bending the second row climate control assembly arm is strictly prohibited; the technician should detach the air distribution door linkage before taking out the second row climate control assembly. First remove the screws which secure the console rear air distribution duct and then detach the nine screws that fix the console liner in place. Separate the nuts from additional screws before you proceed to disconnect the blower motor resistor and free the pin-type retainer. The console reinforcement must be slowly moved backward to access some parts of the blower motor combined with air distribution duct assembly before removing the blower motor electrical connector and all screws to extract the blower motor assembly from the console air distribution duct. The blower motor assembly needs to match up with the console air distribution duct before installation through screw installation and blower motor electrical connector attachment. Position the studs of the blower motor and air distribution duct assembly to the console reinforcement by sliding it forward into the pin-type retainer. Install the two screws at the blower motor resistor electrical connector while simultaneously attaching another two screws with nuts. Apply the nine screws to reinstall the console liner before adding the console rear air distribution duct and its screws. Bending the second row climate control assembly arm should be prevented when connecting the air distribution door linkage. After reattaching the electrical connectors you must activate the pin-type retainer mechanism before places and screws the second row climate control assembly. Position the console rear finish panel onto the floor console and join the retaining clips before screw installation. The last step includes screwing on the console lid as well as fitting the console insert and coin tray and reinstalling the floor console.