FordParts
My Garage
My Account
Cart
OEM 2005 Ford Explorer Sport Trac Heater Core
HVAC Heater Core- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Heater Cores found
2005 Ford Explorer Sport Trac Heater Core Part Number: H2MZ-18476-AC
$77.29 MSRP: $122.73You Save: $45.44 (38%)Ships in 1-3 Business DaysProduct Specifications- Other Name: Heater Assembly - Less Radiator; HVAC Heater Core; Core
- Replaces: F5TZ-18476-A, HC-14
- Item Weight: 2.50 Pounds
- Item Dimensions: 8.4 x 10.9 x 10.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: H2MZ-18476-AC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Duct - Air Vent; HVAC Heater Core Case Assembly; Heater Core Case; HVAC Unit Case; Heater Core; Housing Assembly; Case Assembly; Heater Case
- Replaces: 7L5Z-18471-A, 8L5Z-18471-A, 9L5Z-18471-A
- Item Weight: 0.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9L5Z-18471-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Ford Explorer Sport Trac Heater Core
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford Explorer Sport Trac Heater Core available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford Explorer Sport Trac Heater Core as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2005 Ford Explorer Sport Trac Heater Core Parts Q&A
- Q: How should a heater core leak be tested and how to remove and install on 2005 Ford Explorer Sport Trac?A: Testing for heater core leaks becomes mandatory before experts can detach the component from its placement in the vehicle. You need to remove the A/C evaporator housing as well as the instrument panel before beginning heater core extraction. To begin the heater core removal the PCM and its heat sink need to be extracted by taking out the ground strap screw followed by heat sink removal. The plenum chamber should be installed on the vehicle floor following the removal of the dash panel engine-side nuts which number four in total. The heater core requires removal after securing the cover with removed screws before extracting the heater core element. The installation process requires installing a new oval foam seal around heater core inlet and outlet tubes following which the reverse removal procedure should be done.