FordParts
My Garage
My Account
Cart
OEM 2005 Ford F-250 Super Duty Blower Motor
A/C Heater Blower Motor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Blower Motors found
2005 Ford F-250 Super Duty Blower Motor, Front Part Number: XC3Z-19805-CA
$52.60 MSRP: $86.55You Save: $33.95 (40%)Ships in 1 Business DayProduct Specifications- Other Name: Motor - Cooling Blower; HVAC Blower Motor, Front; Blower Assembly; HVAC Blower Motor
- Position: Front
- Replaces: F81Z-19805-BA
- Base No.: 19805
- Item Weight: 5.40 Pounds
- Item Dimensions: 9.3 x 8.8 x 7.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XC3Z-19805-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Ford F-250 Super Duty Blower Assembly Part Number: 5C3Z-18456-E
Product Specifications- Other Name: Blower Motor
- Replaces: 1C3Z-18456-BA, 3C3Z-18568-AB
- Base No.: 18568
- Item Weight: 12.10 Pounds
- Item Dimensions: 23.0 x 18.2 x 20.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5C3Z-18456-E
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Ford F-250 Super Duty Blower Motor
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford F-250 Super Duty Blower Motor available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford F-250 Super Duty Blower Motor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2005 Ford F-250 Super Duty Blower Motor Parts Q&A
- Q: How to service and repair the blower motor for different engine types on 2005 Ford F-250 Super Duty?A: The service and repair of blower motors begins with removing the retainers and insulator for vehicles that have the 6.0L Diesel engine variation. First disconnect the electrical connector from the vacuum pump followed by removing the bolts after which disconnect the vacuum hose to remove the vacuum pump together with its bracket. Speed control servos on 5.4L and 6.8L engine vehicles require disconnecting their connector then removing bolts to extract them. The blower motor detachment for all vehicles begins with disconnecting its electrical connector followed by removing ventilation tube installation and unfastening the motor screws. Remove the wheel only for reuse by cleaning the shaft end from all corrosion but first take off the push clip. You must execute the reverse steps of removal to finish the installation.