FordParts
My Garage
My Account
Cart
OEM 2006 Ford F-250 Super Duty Blower Motor
A/C Heater Blower Motor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Blower Motors found
2006 Ford F-250 Super Duty Blower Motor, Front Part Number: XC3Z-19805-CA
$52.60 MSRP: $86.55You Save: $33.95 (40%)Ships in 1 Business DayProduct Specifications- Other Name: Motor - Cooling Blower; HVAC Blower Motor, Front; Blower Assembly; HVAC Blower Motor
- Position: Front
- Replaces: F81Z-19805-BA
- Base No.: 19805
- Item Weight: 5.40 Pounds
- Item Dimensions: 9.3 x 8.8 x 7.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XC3Z-19805-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Ford F-250 Super Duty Blower Assembly Part Number: 5C3Z-18456-E
Product Specifications- Other Name: Blower Motor
- Replaces: 1C3Z-18456-BA, 3C3Z-18568-AB
- Base No.: 18568
- Item Weight: 12.10 Pounds
- Item Dimensions: 23.0 x 18.2 x 20.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5C3Z-18456-E
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Ford F-250 Super Duty Blower Motor
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford F-250 Super Duty Blower Motor available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford F-250 Super Duty Blower Motor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2006 Ford F-250 Super Duty Blower Motor Parts Q&A
- Q: How to service and repair the blower motor on a 6.0L diesel engine on 2006 Ford F-250 Super Duty?A: The first step to service the blower motor on 6.0L diesel vehicles is to remove retainers and insulator before disconnecting the vacuum pump electrical connector and unscrewing bolts. Factoring in proper installation requires detaching the vacuum hose followed by removing the vacuum pump and its mounting bracket and using 11 Nm (8 lb-ft) torque at the installation stage on the bolts. The steps for vehicles with 5.4L or 6.8L engines include disconnecting the speed control servo connector before removing its bolts and extracting the servo by tightening bolts to 11 Nm (8 lb-ft) at reinstallation. The installation process requires users to disconnect and remove the blower motor electric connector when working on all vehicles. They must also remove the ventilation tube from the blower motor before unscrewing its mounting screws. Clean the shaft end of the wheel before wheel removal when you plan to reuse it then take out the push clip and wheel from the blower motor. The installation ends by performing opposite steps to the removal process.