FordParts
My Garage
My Account
Cart
OEM 2005 Ford F-250 Super Duty A/C Condenser
Air Conditioning Condenser- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 A/C Condensers found
2005 Ford F-250 Super Duty Condenser Part Number: 6C3Z-19712-AB
Product Specifications- Other Name: Kit - Air Conditioning Condenser; A/C Condenser
- Replaces: F81Z-19712-AA, 6C3Z-19712-AA, YJ-472
- Base No.: 19712
- Item Weight: 13.30 Pounds
- Item Dimensions: 27.5 x 6.2 x 38.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6C3Z-19712-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Ford F-250 Super Duty Condenser Part Number: 6C3Z-19712-BB
Product Specifications- Other Name: Kit - Air Conditioning Condenser; A/C Condenser
- Replaces: 6C3Z-19712-BA, YJ-473, 3C3Z-19712-AA
- Base No.: 19712
- Item Weight: 14.10 Pounds
- Item Dimensions: 28.0 x 5.9 x 37.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6C3Z-19712-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Ford F-250 Super Duty A/C Condenser
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford F-250 Super Duty A/C Condenser available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford F-250 Super Duty A/C Condenser as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2005 Ford F-250 Super Duty A/C Condenser Parts Q&A
- Q: How to service the A/C condenser core on 2005 Ford F-250 Super Duty?A: As a first step to service the A/C condenser core technicians should recover all refrigerant from the system. Before taking off the unit perform a leak test in case of suspected leakage. Start by removing the 9 pin-type retainers and the sight shield after which you should remove the air deflector. Detach the A/C condenser core inlet and outlet lines before getting rid of their original O-ring seals. You must note the hood latch position before unfastening the mounting screws to move the latch into position when reconstructing. After removing screws that connect the right-hand and left-hand A/C condenser core mounting brackets the A/C condenser core can be lifted out from the vehicle. The installation process should follow these steps in reverse order while using fresh O-ring seals and applying correct quantities of clean PAG oil in the refrigerant system. As the last step, one should evacuate the system before conducting a leak test and finally charging the refrigerant system.