Other Name: Center High Mount Stop Light Bulb, Engine Compartment, Trunk, Dome, Map, Interior, and Tail Light Bulbs.; Dome Lamp Assembly; Exterior Bulbs; Map Lamp Bulb
Base No.: 13466
Item Weight: 0.30 Pounds
Item Dimensions: 0.4 x 0.4 x 1.0 inches
Condition: New
Fitment Type: Direct Replacement
SKU: D8BZ-13466-A
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2005 Ford F-350 Super Duty Submodels:
Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, Platinum, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 6.2 L FLEX, 8 Cyl 6.4 L DIESEL, 8 Cyl 6.7 L DIESEL, 8 Cyl 7.3 L DIESEL
Other Name: Bulb, Turn Signal & Parking, Tail, Backup, License Plate, Side Marker, Headlight; Backup Lamp Bulb; Signal, Parking, Stop, High Mount, Cornering, License, and Parking Light Bulbs.
Position: Lower Outer
Replaces: F8DZ-13466-AB, E8AZ-13466-A
Base No.: 13466
Item Weight: 0.40 Pounds
Item Dimensions: 0.4 x 0.4 x 1.0 inches
Condition: New
Fitment Type: Direct Replacement
SKU: F5DZ-13466-B
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2005 Ford F-350 Super Duty Submodels:
Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
2005 Ford F-350 Super Duty Headlight Bulb
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford F-350 Super Duty Headlight Bulb available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford F-350 Super Duty Headlight Bulb as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2005 Ford F-350 Super Duty Headlight Bulb Parts Q&A
Q: How to service the front headlight bulb on 2005 Ford F-350 Super Duty?
A: Service of the headlamp bulb requires removing the two lower headlamp bezel screws before taking off both bezels. The service of the headlamp bulb begins by removing the two top bezel screws and unlatching the tab before disconnecting the electrical connectors. Unscrew all headlamp retaining ring screws before you can detach the retaining ring itself. The access to disconnect the electrical connector becomes possible after positioning the headlamp correctly. The installation process should follow the opposite instructions of removal.