Other Name: Center High Mount Stop Light Bulb, Engine Compartment, Trunk, Dome, Map, Interior, and Tail Light Bulbs.; Dome Lamp Assembly; Exterior Bulbs; Map Lamp Bulb
Base No.: 13466
Item Weight: 0.30 Pounds
Item Dimensions: 0.4 x 0.4 x 1.0 inches
Condition: New
Fitment Type: Direct Replacement
SKU: D8BZ-13466-A
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2006 Ford F-350 Super Duty Submodels:
Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, Platinum, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 6.2 L FLEX, 8 Cyl 6.4 L DIESEL, 8 Cyl 6.7 L DIESEL, 8 Cyl 7.3 L DIESEL
Other Name: Bulb, Turn Signal & Parking, Tail, Backup, License Plate, Side Marker, Headlight; Backup Lamp Bulb; Signal, Parking, Stop, High Mount, Cornering, License, and Parking Light Bulbs.
Position: Lower Outer
Replaces: F8DZ-13466-AB, E8AZ-13466-A
Base No.: 13466
Item Weight: 0.40 Pounds
Item Dimensions: 0.4 x 0.4 x 1.0 inches
Condition: New
Fitment Type: Direct Replacement
SKU: F5DZ-13466-B
Warranty: This genuine part is guaranteed by Ford's
factory warranty.
More Info
Fits the following 2006 Ford F-350 Super Duty Submodels:
Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
2006 Ford F-350 Super Duty Headlight Bulb
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford F-350 Super Duty Headlight Bulb available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford F-350 Super Duty Headlight Bulb as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2006 Ford F-350 Super Duty Headlight Bulb Parts Q&A
Q: How to service the headlight bulb on 2006 Ford F-350 Super Duty?
A: Service for the headlamp bulb requires switching both the headlamp button and ignition controls to OFF position. The service of the headlamp bulb starts by disconnecting its electrical connector. The bulb can be removed after counterclockwise rotation at one-eighth turn but handle it exclusively at the base to steer clear of damaging the pressurized glass envelope that could break when there are scratches or drops. The bulb should never stay out for an extended time because this causes performance issues while permitting contaminants to access the headlamp unit that may settle on lens and reflector surfaces. To install the new bulb start by performing the exact opposite actions which began with the removal process by placing it carefully and turning it clockwise for full locking. It is unsafe to start the headlamp with an absent bulb.