How to Service and Repair the Hood Cable on 2005 Ford F-350 Super Duty?

The first step when servicing the hood cable should be to disconnect the battery. Start by removing both the hood latch followed by its pin-type retainers. You must set the air deflector to reach the hood cable guide before taking out the guide together with any other remaining guides. The powertrain control module (PCM) alongside the A-pillar lower trim panel both need to be taken off. The vehicle must support the hood latch release/park brake bracket after you remove all the nuts from this section of the vehicle. Release the cable conduit then detach the hood cable from its handle. Before finishing the installation process remove the hood cable and dash panel grommet through the front access point of the vehicle. The reverse steps of installation should follow the removal procedure.

OEM 2005 Ford F-350 Super Duty Hood Cable

Hood Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Hood Cables found

View related parts
2005 Ford F-350 Super Duty Release Cable, Front Part Number: 5C3Z-16916-AA
$29.86 MSRP: $43.47
You Save: $13.61 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Control; Hood Release Cable, Front; Hood Release Cable
- Manufacturer Note: Cable Asy
- Position: Front
- Replaces: F81Z-16916-AA
- Base No.: 16916
- Item Weight: 0.50 Pounds
- Item Dimensions: 19.6 x 11.0 x 0.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5C3Z-16916-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford F-350 Super Duty Submodels:
- Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL
View related parts
2005 Ford F-350 Super Duty Release Handle, Front Part Number: F81Z-16916-AB
$34.80 MSRP: $49.37
You Save: $14.57 (30%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Cable Assembly - Hood Control; Hood Release Handle, Front; Hood Release Cable, Front; Release Cable; Hood Release Cable
- Position: Front
- Base No.: 16916
- Item Weight: 0.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F81Z-16916-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford F-350 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 6.4 L DIESEL, 8 Cyl 7.3 L DIESEL

2005 Ford F-350 Super Duty Hood Cable

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford F-350 Super Duty Hood Cable available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford F-350 Super Duty Hood Cable as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2005 Ford F-350 Super Duty Hood Cable Parts Q&A

Q: How to Service and Repair the Hood Cable on 2005 Ford F-350 Super Duty?
A: The first step when servicing the hood cable should be to disconnect the battery. Start by removing both the hood latch followed by its pin-type retainers. You must set the air deflector to reach the hood cable guide before taking out the guide together with any other remaining guides. The powertrain control module (PCM) alongside the A-pillar lower trim panel both need to be taken off. The vehicle must support the hood latch release/park brake bracket after you remove all the nuts from this section of the vehicle. Release the cable conduit then detach the hood cable from its handle. Before finishing the installation process remove the hood cable and dash panel grommet through the front access point of the vehicle. The reverse steps of installation should follow the removal procedure.