OEM 2005 Ford Focus Air Bag Sensor

2005 Ford Focus Air Bag Sensor Parts Questions & Experts Answers

• Q: What Precautions Should Be Taken When Servicing the Side Impact Air Bag Sensor on 2005 Ford Focus?

  A: The side impact sensor servicing demands the use of safety glasses to protect from possible injuries stemming from accidental air bag discharges. The vehicle sensor needs to be oriented properly before it can perform the system functions correctly. Any format or wiring deformation should result in immediate replacement of the sensor along with the supplemental restraint system components following a collision. This maintenance needs to happen regardless of whether air bags deploy or not. The use of memory saver devices should be avoided because they present personal injury threats to the operator. The RCM fuse removal will cause the air bag warning lamp to activate while the ignition switch is ON but this condition is expected to be normal without indicating an SRS fault. The full operation and faultlessness of SRS must be confirmed prior to giving back the vehicle to the customer. New part installation constitutes necessary repairs yet the diagnostic protocol should be redone if the problem still exists to see if the original component matches the issue. Start the procedure by disconnecting system power before unmounting both seats along with the scuff plates and separating the floor covering from the floor panel. Separate the electrical connector from the side impact sensor but remember the position of sensor-oriented tabs for installation reference. Begin by removing the side impact sensor bolts and the side impact sensor itself before proceeding with installation steps and system powering process.