How to Service and Repair the Throttle Position Sensor on 2005 Ford Focus?

Service and repair of the Throttle Position (TP) Sensor requires the initial step to be disconnecting the battery ground cable. You must separate the TP sensor electrical connector before you unfasten the retaining screws that secure the TP sensor. The TPM sensor becomes removable after the removal of all retaining screws. The new sensor should be installed by executing the inverse sequence of removal steps.

OEM 2005 Ford Focus Throttle Position Sensor

TPS Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Throttle Position Sensor found

View related parts
2005 Ford Focus Throttle Position Sensor
Part Number: YS4Z-9B989-BB
$35.72 MSRP: $57.64
You Save: $21.92 (39%)
ADD TO CART
Product Specifications
- Other Name: Potentiometer - Engine Throttle; Throttle Pos Sensor; Throttle Sensor
- Base No.: 9B989
- Item Weight: 0.50 Pounds
- Item Dimensions: 6.1 x 4.2 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: YS4Z-9B989-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Focus Submodels:
- LX, S, SE, SES, Sony Limited Edition, ST, SVT, ZTS, ZTW, ZX3, ZX4, ZX4 ST, ZX5, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS

2005 Ford Focus Throttle Position Sensor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford Focus Throttle Position Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford Focus Throttle Position Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2005 Ford Focus Throttle Position Sensor Parts Questions & Experts Answers

Q: How to Service and Repair the Throttle Position Sensor on 2005 Ford Focus?
A: Service and repair of the Throttle Position (TP) Sensor requires the initial step to be disconnecting the battery ground cable. You must separate the TP sensor electrical connector before you unfasten the retaining screws that secure the TP sensor. The TPM sensor becomes removable after the removal of all retaining screws. The new sensor should be installed by executing the inverse sequence of removal steps.