FordParts
My Garage
My Account
Cart
OEM 2005 Ford Freestar Brake Booster
Brake Power Booster- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Brake Boosters found
2005 Ford Freestar Brake Booster Part Number: 7F2Z-2005-B
Product Specifications- Other Name: Booster Assembly - Brake; Power Brake Booster; Power Booster
- Replaces: 6F2Z-2005-B
- Base No.: 5F2Z-2005-B
- Item Weight: 7.70 Pounds
- Item Dimensions: 15.7 x 10.1 x 10.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7F2Z-2005-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Ford Freestar Brake Booster Part Number: 7F2Z-2005-A
Product Specifications- Other Name: Booster Assembly - Brake; Power Brake Booster; Power Booster
- Replaces: 6F2Z-2005-A
- Base No.: 2005
- Item Weight: 7.40 Pounds
- Item Dimensions: 10.9 x 10.9 x 10.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7F2Z-2005-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Ford Freestar Brake Booster
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford Freestar Brake Booster available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford Freestar Brake Booster as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2005 Ford Freestar Brake Booster Parts Q&A
- Q: How to service the vacuum brake booster on 2005 Ford Freestar?A: Service of the vacuum brake booster starts with master cylinder removal. The throttle body first requires coupling removal of the speed control and accelerator cables followed by detachment of the wiring harness retaining bracket. The nut and bolt from the accelerator cable bracket must be removed before setting aside the speed control and accelerator cable bracket and securing this assembly with a torque of 15 Nm (11 ft. lbs.). The speed control actuator requires removal of both its bolts that need to reach 10 Nm of torque (89 inch lbs.) for proper installation. Take off the brake booster vacuum hose from the brake booster vacuum check valve before removing both the redundant self-locking clip cover along with the self-locking clip from the brake pedal. The brake pedal requires removal of its brake pedal position switch together with booster rod and bushing while four brake booster nuts must be tightened to 25 Nm (18 ft. lbs.) during reassembly. To finish the task remove the brake booster from the vehicle and reinstall it following the reverse order of removal.