FordParts
My Garage
My Account
Cart
OEM 2006 Ford Freestar Brake Booster
Brake Power Booster- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Brake Boosters found
2006 Ford Freestar Brake Booster Part Number: 7F2Z-2005-B
Product Specifications- Other Name: Booster Assembly - Brake; Power Brake Booster; Power Booster
- Replaces: 6F2Z-2005-B
- Base No.: 5F2Z-2005-B
- Item Weight: 7.70 Pounds
- Item Dimensions: 15.7 x 10.1 x 10.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7F2Z-2005-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Ford Freestar Brake Booster Part Number: 7F2Z-2005-A
Product Specifications- Other Name: Booster Assembly - Brake; Power Brake Booster; Power Booster
- Replaces: 6F2Z-2005-A
- Base No.: 2005
- Item Weight: 7.40 Pounds
- Item Dimensions: 10.9 x 10.9 x 10.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7F2Z-2005-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Ford Freestar Brake Booster
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford Freestar Brake Booster available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford Freestar Brake Booster as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2006 Ford Freestar Brake Booster Parts Q&A
- Q: How to service and repair the vacuum brake booster on 2006 Ford Freestar?A: Begin repairing and servicing of the vacuum brake booster through brake master cylinder removal. The first step is to detach the speed control and accelerator cables from throttle body then remove the wiring harness retaining bracket. Disassemble the accelerator cable bracket components before placing it to the side and following a torque specification of 15 Nm (11 ft. lbs.) for installation. The speed control actuator must be dismounted with two bolts that need to be tightened to 89 inch lbs. (10 Nm) when reinstalling the system. Separate the brake booster aspirator tube check valve from the brake booster device and take out both the self-locking clip cover along with the self-locking clip from the brake pedal. When reinstalling the brake pedal start by removing its brake pedal position switch then booster rod and bushing following the tightening of the four brake booster nuts to 25Nm (18ftlbs). The removal process includes taking the brake booster from the vehicle before performing the installation steps in reverse order.