My Garage
Cart

OEM 2005 Ford Freestar Hood Latch

Engine Hood Latch
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Hood Latch found

  • 2005 Ford Freestar Hood Latch - 6F2Z-16700-AA
    2005 Ford Freestar Hood Latch Diagram - 6F2Z-16700-AA
    View related parts

    2005 Ford Freestar Lock, Front Part Number: 6F2Z-16700-AA

    $31.12 MSRP: $42.34
    You Save: $11.22 (27%)
    ADD TO CART
    Product Specifications
    • Other Name: Latch Assembly - Hood; Hood Latch, Front; Latch; Hood Latch
    • Manufacturer Note: Striker Is PIA To The 16612 Hood Assy
    • Position: Front
    • Replaces: 4F2Z-16700-AA
    • Base No.: 16700
    • Item Weight: 1.60 Pounds
    • Item Dimensions: 6.7 x 5.4 x 2.6 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 6F2Z-16700-AA
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2005 Ford Freestar Submodels:
    • Base, Limited, S, SE, SEL, SES | 6 Cyl 3.9 L GAS, 6 Cyl 4.2 L GAS

2005 Ford Freestar Hood Latch

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford Freestar Hood Latch available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford Freestar Hood Latch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2005 Ford Freestar Hood Latch Parts Q&A

  • Q: How to service and repair the hood latch on 2005 Ford Freestar?
    A: The service and repair process starts by uninstalling 8 pin-type retainers together with the upper radiator sight shield. The second hood latch release cable must be detached from the hood latch point. It is necessary to note down the initial position of the hood latch so people can return it properly before removing the securing bolts. After bolt installation complete the tightening procedure by using torque wrenches set to 12 Nm (9 lb-ft). Move on to disconnecting the primary hood latch release cable after placing the hood latch. The installation ends by performing the removal steps in reverse order while testing the hood latch adjustment for proper hood striker engagement with the hood latch.