My Garage
Cart

OEM 2005 Ford Freestar Wiper Arm

Windshield Wiper Arm
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Wiper Arms found

  • 2005 Ford Freestar Wiper Arm - F78Z-17526-AB
    2005 Ford Freestar Wiper Arm Diagram - F78Z-17526-AB
    View related parts

    2005 Ford Freestar Wiper Arm, Passenger Side Part Number: F78Z-17526-AB

    $49.43 MSRP: $68.38
    You Save: $18.95 (28%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Arm Assembly - Wiper; Windshield Wiper Arm, Right; Front Arm
    • Position: Passenger Side
    • Base No.: 17526
    • Item Weight: 2.10 Pounds
    • Item Dimensions: 34.3 x 3.1 x 3.1 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: F78Z-17526-AB
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2005 Ford Freestar Submodels:
    • Base, Limited, S, SE, SEL, SES | 6 Cyl 3.9 L GAS, 6 Cyl 4.2 L GAS
  • 2005 Ford Freestar Wiper Arm Diagram - XF2Z-17526-AA
    View related parts
    Product Specifications
    • Other Name: Arm Assembly - Wiper; Back Glass Wiper Arm; Rear Arm
    • Position: Rear Passenger Side
    • Base No.: 17526
    • Item Weight: 0.70 Pounds
    • Item Dimensions: 1.5 x 5.3 x 37.7 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: XF2Z-17526-AA
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2005 Ford Freestar Submodels:
    • Base, Limited, S, SE, SEL, SES | 6 Cyl 3.9 L GAS, 6 Cyl 4.2 L GAS
  • 2005 Ford Freestar Wiper Arm Diagram - XF2Z-17526-AC
    View related parts
    Product Specifications
    • Other Name: Arm Assembly - Wiper; Windshield Wiper Arm, Left; Front Arm
    • Position: Driver Side
    • Replaces: F68Z-17526-BA
    • Base No.: 17526
    • Item Weight: 1.20 Pounds
    • Item Dimensions: 28.8 x 4.1 x 4.0 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: XF2Z-17526-AC
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2005 Ford Freestar Submodels:
    • Base, Limited, S, SE, SEL, SES | 6 Cyl 3.9 L GAS, 6 Cyl 4.2 L GAS

2005 Ford Freestar Wiper Arm

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford Freestar Wiper Arm available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford Freestar Wiper Arm as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2005 Ford Freestar Wiper Arm Parts Q&A

  • Q: How to Service and Repair the Wiper Arm on 2005 Ford Freestar?
    A: A technician needs to start arm pivot repair and servicing by unscrewing the windshield wipers from their mounts. You must disconnect the hose before you remove the push-pins from the cowl panel grille for removing the grille. Take the grommet off the washer hose from the cowl panel before placing the hose to the side. Take out the A/C air inlet filter only if it exists. Start by taking out the nine cowl panel bolts before setting the cowl panel to the side. The vehicle requires the cowl panel removal after disconnecting the windshield wiper motor electrical connector. Remove the bolt holding wiper pivot arms to the wiper motor before carefully using a prying motion to remove the wiper pivot arms from the wiper pivot ball and socket. Insert the pivot arm socket onto the pivot ball and press until it reaches complete seat inside the assembly. Mount the pivot arms onto the windshield wiper motor while installing a bolt that needs tightening to 15 Nm (11 lb-ft). Reinstall the cowl panel after putting back the windshield wiper motor electrical connector. Install the washer hose with its grommet through the cowl panel before proceeding to secure the nine cowl panel bolts at 6 Nm (53 lb-in). Refit the A/C air inlet filter only if it needs replacement. You must position the cowl panel grille inside the vehicle after which you must connect the washer hose before inserting the push-pins. Installation of the windshield wiper arms needs to begin with tightening the wiper nuts to 27 Nm (20 lb-ft) before winding and parking the wipers to check their alignment.