How to Service and Repair the Power Steering Reservoir on 2005 Ford Freestar?

To service the power steering reservoir empty it to prevent contamination. Unscrew the lower isolator screw, disconnect the pump hose and the return hose and remove the reservoir. Install again doing the reverse operation and pour the system with the appropriate fluid making sure that the bolt is tightened to 10 Nm.

OEM 2005 Ford Freestar Power Steering Reservoir

Power Steering Fluid Reservoir Tank

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Power Steering Reservoir found

View related parts
2005 Ford Freestar Power Steering Reservoir Part Number: 4F2Z-3A697-AA
Product Specifications
- Other Name: Reservoir Assembly; Reservoir
- Base No.: 3A697
- Item Weight: 1.00 Pounds
- Item Dimensions: 3.3 x 4.1 x 7.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4F2Z-3A697-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Ford Freestar Submodels:
- Base, Limited, S, SE, SEL, SES | 6 Cyl 3.9 L GAS, 6 Cyl 4.2 L GAS

2005 Ford Freestar Power Steering Reservoir

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Ford Freestar Power Steering Reservoir available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Ford Freestar Power Steering Reservoir as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2005 Ford Freestar Power Steering Reservoir Parts Q&A

Q: How to Service and Repair the Power Steering Reservoir on 2005 Ford Freestar?
A: To service the power steering reservoir empty it to prevent contamination. Unscrew the lower isolator screw, disconnect the pump hose and the return hose and remove the reservoir. Install again doing the reverse operation and pour the system with the appropriate fluid making sure that the bolt is tightened to 10 Nm.