FordParts
My Garage
My Account
Cart
OEM 2006 Ford Freestar Wiper Arm
Windshield Wiper Arm- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Wiper Arms found
2006 Ford Freestar Wiper Arm, Passenger Side Part Number: F78Z-17526-AB
$49.43 MSRP: $68.38You Save: $18.95 (28%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Arm Assembly - Wiper; Windshield Wiper Arm, Right; Front Arm
- Position: Passenger Side
- Base No.: 17526
- Item Weight: 2.10 Pounds
- Item Dimensions: 34.3 x 3.1 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F78Z-17526-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Arm Assembly - Wiper; Back Glass Wiper Arm; Rear Arm
- Position: Rear Passenger Side
- Base No.: 17526
- Item Weight: 0.70 Pounds
- Item Dimensions: 1.5 x 5.3 x 37.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XF2Z-17526-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Ford Freestar Wiper Arm, Driver Side Part Number: XF2Z-17526-AC
Product Specifications- Other Name: Arm Assembly - Wiper; Windshield Wiper Arm, Left; Front Arm
- Position: Driver Side
- Replaces: F68Z-17526-BA
- Base No.: 17526
- Item Weight: 1.20 Pounds
- Item Dimensions: 28.8 x 4.1 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: XF2Z-17526-AC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2006 Ford Freestar Wiper Arm
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2006 Ford Freestar Wiper Arm available at FordPartsDeal.com. You can confidently purchase our OEM 2006 Ford Freestar Wiper Arm as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2006 Ford Freestar Wiper Arm Parts Q&A
- Q: How to Service the Wiper Arm Pivot on 2006 Ford Freestar?A: First step for servicing the pivot arm requires windshield wiper arm removal. The setup starts with disconnecting the washer hose when you prepare to remove the cowl panel grille using pushpin-type retainers. Now extract the grommet from the washer hose at the cowl panel then place the hose to the side. Take out the A/C air inlet filter only if present. The process begins by taking out the nine cowl panel bolts before setting the cowl panel to the side. The vehicle requires the windshield wiper motor electrical connector off and the removal of the cowl panel. Uninstall the wiper pivot arms after removing their bolt from the wiper motor. To remove the wiper pivot arms safely you should use a tool to separate them from the wiper pivot ball at its socket connection. Seal the pivot arm socket onto the pivot ball by applying enough pressure until it reaches complete insertion. Connect the pivot arms to the windshield wiper motor before installing the bolt while tightening it to 15 Nm (11 lb-ft). Reinstall the cowl panel after which reconnect the electrical connector that goes to the windshield wiper motor. Install the washer hose with grommet inside the cowl panel before installing and tightening the nine cowl panel bolts to 6 Nm (53 lb-in). Reinstall the A/C air inlet filter only when it applies. After placing the cowl panel grille in position the washer hose needs to be reconnected and the pushpins must be installed. Finish the job by reattaching the windshield wiper arms along with their nuts which should be tightened to 27 Nm (20 lb-ft). After that cycle the windshield wipers to verify proper positioning.