FordParts
My Garage
My Account
Cart
OEM 2005 Lincoln LS Fan Motor
Cooling Fan Motor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Fan Motor found
2005 Lincoln LS Fan & Motor Part Number: 5W4Z-8C607-AA
Product Specifications- Other Name: Fan And Motor Assembly; Engine Cooling Fan Assembly; Radiator Fan Assembly; Fan Blade; Fan Assembly
- Manufacturer Note: Electric Cooling Fan
- Base No.: 8C607
- Item Weight: 15.70 Pounds
- Item Dimensions: 30.9 x 6.7 x 22.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5W4Z-8C607-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Lincoln LS Fan Motor
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Lincoln LS Fan Motor available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Lincoln LS Fan Motor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2005 Lincoln LS Fan Motor Parts Q&A
- Q: How to service the radiator cooling fan motor and shroud on 2005 Lincoln LS?A: The service of radiator cooling fan motor and shroud starts with disconnecting the battery cable ground. Start the radiator cooling fan service by first removing the air cleaner outlet pipe followed by disconnecting both electrical connectors for the cooling fan motor and shroud as well as disconnecting the coolant control valve jumper harness electrical connector. The receiver/drier bracket bolt needs removal followed by bracket placement aside and it should be tightened to 11 Nm (8 ft. lbs.) during reassembly. Detach the electrical connector of the coolant control valve before unscrewing its retaining bolt and reinstall it at 6 Nm torque (53 inch lbs.). The two bolts securing the auxiliary coolant pump should be removed while following installation the correct torque is 9 Nm (79 ft. lbs.). The cooling fan motor with its shroud needs two bolts removed before installing but they must be tightened to 10 Nm (89 inch lbs.) force. To finish installing the component reverse the removal sequence in its entirety.