FordParts
My Garage
My Account
Cart
OEM 2005 Lincoln LS Wheel Hub
Wheel Axle Hub- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
5 Wheel Hubs found
2005 Lincoln LS Knuckle Assembly, Passenger Side Part Number: 2W4Z-5B715-AA
$973.30 MSRP: $1346.47You Save: $373.17 (28%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Knuckle And Hub Assembly; Hub; Knuckle
- Position: Passenger Side
- Replaces: -W701904-S309M, 6W4Z-1109-AA, XW4Z-1109-AA, XW4Z-5A968-AA
- Base No.: 5A968B
- Item Weight: 13.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2W4Z-5B715-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Lincoln LS Knuckle Assembly, Driver Side Part Number: 2W4Z-5B716-AA
$1031.67 MSRP: $1427.22You Save: $395.55 (28%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Knuckle And Hub Assembly; Wheel Bearing and Hub Assembly; Wheel Hub; Hub; Knuckle; Hub Assembly
- Position: Driver Side
- Replaces: XW4Z-5A969-AA
- Base No.: 5A968
- Item Weight: 17.00 Pounds
- Item Dimensions: 14.7 x 14.4 x 9.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2W4Z-5B716-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Lincoln LS Hub Assembly, Front Part Number: 5W4Z-1104-BA
Product Specifications- Other Name: Hub Assembly - Wheel; Front Wheel Bearing and Hub Assembly; Wheel Hub Repair Kit.; Front Hub & Bearing; Wheel Bearing and Hub Assembly
- Position: Front
- Replaces: 3W4Z-1104-BA
- Base No.: 1104
- Item Weight: 9.30 Pounds
- Item Dimensions: 8.2 x 6.0 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 5W4Z-1104-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Knuckle And Hub Assembly; Steering Knuckle, Front Right; Knuckle
- Position: Front Passenger Side
- Base No.: 3K225
- Item Weight: 12.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6W4Z-3K225-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
- Product Specifications
- Other Name: Knuckle And Hub Assembly; Knuckle
- Position: Driver Side
- Item Weight: 12.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5W4Z-3K226-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Lincoln LS Wheel Hub
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Lincoln LS Wheel Hub available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Lincoln LS Wheel Hub as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2005 Lincoln LS Wheel Hub Parts Q&A
- Q: How to service and repair the front Wheel Hub and bearing on 2005 Lincoln LS?A: Before beginning front wheel bearing and hub servicing start by placing the vehicle in neutral mode on a hoist. Brake disc removal along with retainers should be followed by placing the inner fender skirt aside. Before proceeding disabling the ABS sensor and removing the ABS wire from its retaining points. Exercise caution with the wheel hub and bearing since they do not fit into the wheel knuckle by refraining from using slide hammers or striking the wheel hub and bearing at the back to avoid causing damage. Use penetrating and lock lubricant to apply oil to the wheel hub and bearing after performing any necessary cleaning of rust or corrosion from their rear surfaces. It is essential not to detach the ABS sensor from its hub position unless a new sensor is being added. Verify that the O-ring remains whole and change it if found faulty. Begin to remove the wheel hub-to-wheel knuckle bolts which will be discarded right away until you properly extract the wheel hub and bearing assembly. Drive the new bolts to a torque of 90 Nm which corresponds to 66 foot-lbs during installation. Dismount the wheel hub and bearing gently by hand inside a fully clean knuckle bore to achieve proper seating. You should apply high temperature nickel anti-seize lubricant to the bearing carrier and wheel knuckle surfaces before following the removal method in reverse order for installation.