What Steps Should Be Taken Before Servicing and Repairing the Front Wheel Bearing Hub on 2005 Lincoln Navigator?

The first step for hub front wheel service and repair requires turning off air suspension electrical power through the air suspension switch found in the LH rear quarter trim panel to avoid unexpected air spring inflation or deflation which would cause vehicle shift movement. Begin the process by removing the wheel speed sensor connector before moving on to take off the wheel as well as its tire. After pulling the bolt free the retainers can be detached. Position the caliper along with pads and anchor plate to the side for safekeeping by removing bolts instead of allowing the brake hose to support the caliper. After the brake disc removal follow by removing the bolts which secure the wheel bearing hub assembly. The original wheel bearing and hub installation requires you to put a new O-ring before assembly. The removal procedure should be reversed when finishing this process.

OEM 2005 Lincoln Navigator Wheel Bearing

Hub Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Wheel Bearings found

View related parts
2005 Lincoln Navigator Bearing Assembly, Rear Inner
Part Number: BL3Z-4621-B
$23.82 MSRP: $34.67
You Save: $10.85 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing Assembly - Driving Pinion; Differential Pinion Bearings, Rear Inner/Outer; Axle Bearing; Bearing Cup; Pinion Bearings; Front Pinion Bearing; Cup; Bearing
- Position: Rear Inner
- Replaces: 7L1Z-4621-A, 7L1Z-4621-AB, E5TZ-4616-A, TBAA-4621-A
- Base No.: 4621
- Item Weight: 2.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: BL3Z-4621-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Lincoln Navigator Submodels:
- Base, L, L Luxury, L Ultimate, Luxury, Ultimate | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2005 Lincoln Navigator Hub & Bearing, Front
Part Number: 6L1Z-1104-D
Product Specifications
- Other Name: Hub Assembly - Wheel; Front Wheel Bearing & Hub; Wheel Hub Repair Kit; Hub Assembly; Front Hub
- Position: Front
- Replaces: 6L1Z-1104-B, HUB-256, 6L1Z-1104-CA, HUB-176
- Base No.: 1104
- Item Weight: 16.20 Pounds
- Item Dimensions: 7.6 x 9.2 x 9.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L1Z-1104-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2005 Lincoln Navigator Submodels:
- Base, Luxury, Ultimate | 8 Cyl 5.4 L GAS

2005 Lincoln Navigator Wheel Bearing

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Lincoln Navigator Wheel Bearing available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Lincoln Navigator Wheel Bearing as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2005 Lincoln Navigator Wheel Bearing Parts Questions & Experts Answers

Q: What Steps Should Be Taken Before Servicing and Repairing the Front Wheel Bearing Hub on 2005 Lincoln Navigator?
A: The first step for hub front wheel service and repair requires turning off air suspension electrical power through the air suspension switch found in the LH rear quarter trim panel to avoid unexpected air spring inflation or deflation which would cause vehicle shift movement. Begin the process by removing the wheel speed sensor connector before moving on to take off the wheel as well as its tire. After pulling the bolt free the retainers can be detached. Position the caliper along with pads and anchor plate to the side for safekeeping by removing bolts instead of allowing the brake hose to support the caliper. After the brake disc removal follow by removing the bolts which secure the wheel bearing hub assembly. The original wheel bearing and hub installation requires you to put a new O-ring before assembly. The removal procedure should be reversed when finishing this process.