Warranty: This genuine part is guaranteed by Ford's
factory warranty.
Fits the following Vehicles:
2018-2021 Lincoln Navigator | Base, Black Label, L Black Label, L Livery, L Reserve, L Select, Premiere, Reserve, Select | 6 Cyl 3.5 L GAS
Lincoln Navigator Wheel Bearing
Welcome to our website where you can discover high-quality, genuine Lincoln Navigator Wheel Bearing. We offer an extensive inventory of OEM Lincoln Navigator Wheel Bearing at affordable prices. We are committed to providing top-rated customer service along with prompt delivery.
Lincoln Navigator Wheel Bearing Parts Questions & Experts Answers
Q: How to service the wheel bearing and wheel hub in the front suspension on Lincoln Navigator?
A: The process of servicing the wheel bearing and Wheel Hub in the front suspension demands detachment of the wheel speed sensor electrical connector followed by wheel and tire removal. Closely disconnect the wheel speed sensor harness from its retainers before detaching it and tighten the harness to 12 Nm (106 lb-in) when re-assembling the components. The brake hose operation demands proper maintenance by removing the two bolts so the caliper and anchor plate assembly can be supported with mechanic's wire before securing it at 200 Nm (148 lb-ft) torque. Following this operation discard the Brake Disc as well as all four wheel bearing and wheel hub bolts before reinstalling your new hardware while tightening them to 175 Nm (129 lb-ft). To install new wheel bearing and wheel hub components you should detach the wheel speed sensor bolt and sensor while reinstalling them with a torque size of 18 Nm (159 lb-in). When reinstalling the wheel bearing and hub without replacement the original components must receive a new O-ring seal to avert harm to the wheel bearing. Proceed with the installation by performing the opposite steps used for removal.