FordParts
My Garage
My Account
Cart
OEM 2005 Mercury Mountaineer Crankshaft Position Sensor
Engine Crankshaft Position Sensor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Crankshaft Position Sensors found
2005 Mercury Mountaineer Crankshaft Position Sensor Part Number: 5L2Z-6C315-A
$41.82 MSRP: $66.40You Save: $24.58 (38%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Sensor - Crankshaft Position; Engine Crankshaft Position Sensor; Electrical Connector.; Position Sensor; Sensor - Crankshaft Position - Cps
- Replaces: 1L2Z-6C315-BB
- Base No.: 6C315
- Item Weight: 0.40 Pounds
- Item Dimensions: 8.7 x 7.7 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L2Z-6C315-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Mercury Mountaineer Crankshaft Position Sensor Part Number: 1W7Z-6C315-AB
$41.11 MSRP: $65.27You Save: $24.16 (38%)Ships in 1 Business DayProduct Specifications- Other Name: Sensor - Crankshaft Position; Engine Crankshaft Position Sensor; Crankshaft Sensor; Position Sensor; Sensor - Crankshaft Position - Cps
- Manufacturer Note: Sensor asy. (Crankshaft position) #1W7E 6C315-AA
- Replaces: 1W7Z-6C315-AA
- Base No.: 6C315
- Item Weight: 0.30 Pounds
- Item Dimensions: 8.1 x 6.2 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1W7Z-6C315-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2005 Mercury Mountaineer Crankshaft Position Sensor
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2005 Mercury Mountaineer Crankshaft Position Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2005 Mercury Mountaineer Crankshaft Position Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2005 Mercury Mountaineer Crankshaft Position Sensor Parts Q&A
- Q: How to Service the Crankshaft Position Sensor on 2005 Mercury Mountaineer?A: You should start the crankshaft position (CKP) sensor service by placing the vehicle in neutral position over a hoist. Follow this procedure by disconnecting the battery ground cable followed by removing the electrical connector of the CKP sensor. The sensor requires removal by loosening its bolt then pulling out the sensor body. The bolt securing the new sensor requires a torque setting of 10 Nm with the wire connections placed at a safe distance from the battery cable. Finish up the process by following the reverse order of the removal process.